Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Damping in frequency

Posted 2024/11/08 7:47 JST 1 Reply

Aim FAR
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Does Comsol consider any form of damping from the material in frequency domain study ? or only considered once added under Linear Elastic Material ?

1 Reply Last Post 2024/11/08 17:13 JST
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 months ago 2024/11/08 17:13 JST

You can set a complex modulus in the material. The imaginary part accounts for damping.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You can set a complex modulus in the material. The imaginary part accounts for damping.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content