Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

acoustic pressure study ignorying losses

Posted 2025/03/14 11:48 GMT-4 1 Reply

enza panzardi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I have question, I need to perform frequency domain simulations in Acoustic pressure study and I would like to observe the acoustic pressure of the system considering the material losses and then without considering it. Is there a method to do it?

1 Reply Last Post 2025/03/15 8:47 GMT-4
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025/03/15 8:47 GMT-4

There are plenty of acoustic loss models in COMSOL, and you can also disable some of them trivially, or make several similar models with and without losses, as you please.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
There are plenty of acoustic loss models in COMSOL, and you can also disable some of them trivially, or make several similar models with and without losses, as you please.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content