Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat transfer with surface to surface radiation is not coming under multiphysics

Posted 2025/03/25 13:28 GMT-4 Physics Interfaces Version 5.1 1 Reply

Mohamad Rayes
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Im relatively new to comsol, im using comsol 5.1 and i want the Heat transfer with surface to surface radiation to come under multiphysics but it does not.

1 Reply Last Post 2025/03/25 15:32 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025/03/25 15:32 GMT-4

Hello Mohamad,

Surface-to-surface radiation is a capability included only the optional Heat Transfer Module. Very likely the license you are using does not include that product. You can check on the products including on a license by going to File > Used and Licensed Products.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Mohamad, Surface-to-surface radiation is a capability included only the optional Heat Transfer Module. Very likely the license you are using does not include that product. You can check on the products including on a license by going to File > Used and Licensed Products. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content