Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

PMLs in structural mechanics

Posted 2013/10/24 18:24 GMT-4 Structural Mechanics Version 4.3a 0 Replies

Yangyang Liu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I'm trying to simulate a silicon ring in the eigenfrequency mode in Structural mechanics module, to compute the frequency of each mechanical mode and its quality factor. My understanding is that once I have the geometry and boundary condition properly set up, I would be able to extract that from the complex eigenfrequency solution. I read in the manual that PMLs and infinite element boundary conditions can be implemented, but I don't see it anything and couldn't find an answer after searching this forum (I did read the other threads about PMLs) and the internet.

Any suggestion would be much appreciated!
0 Replies Last Post 2013/10/24 18:24 GMT-4
COMSOL Moderator

Hello Yangyang Liu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content