Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat transfer coefficient

Posted 2013/12/11 8:29 GMT-5 MEMS & Nanotechnology, Heat Transfer & Phase Change, MEMS & Piezoelectric Devices Version 4.3a, Version 4.3b 0 Replies

Li Chenchen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi everyone
there is an example in the comsol microresister_beam,in the example there is a Heat transfer coefficient k,why k is 5[W/(m^2*K)],but in the example Thermal Microactuator there is also a Heat transfer coefficient
htc_s 0.04[W/(m*K)]/2[um] could you tell me what is the difference
thanks a lot
0 Replies Last Post 2013/12/11 8:29 GMT-5
COMSOL Moderator

Hello Li Chenchen

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content