Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

decimal

Posted 2014/03/03 21:17 JST Interfacing, Results & Visualization Version 4.3 2 Replies

Tarik Madani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,
how to round a calculation result to 5 decimal?

thank you
2 Replies Last Post 2014/03/03 22:51 JST
Marino Miccio
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014/03/03 22:06 JST
Dear Tarik,

you can set it if you go in:
Options -> Preferences -> General -> Input display precision

Regards.

--
Marino Miccio
Chemical Engineer
marinomiccio.wix.com/home
Dear Tarik, you can set it if you go in: Options -> Preferences -> General -> Input display precision Regards. -- Marino Miccio Chemical Engineer http://marinomiccio.wix.com/home
Tarik Madani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014/03/03 22:51 JST
thank you Marino.

Best regards.
thank you Marino. Best regards.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content