Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to add time dependent heat source

Posted 2014/08/28 14:52 GMT-4 Version 4.4 5 Replies

Fred Xie
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

I am kinda new with COMSOL. I am wondering how to add time dependent heat source.
I have a 2D geometry, and a heat source in the center of the geometry.
I would like to have a time-varied heat source (in total power), and do time dependent simulation.

Thanks

5 Replies Last Post 2014/09/02 4:53 GMT-4
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014/08/29 10:34 GMT-4
So you want something like q=f(t) or Tsource=f(t)? What should f look like?
So you want something like q=f(t) or Tsource=f(t)? What should f look like?
Fred Xie
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014/08/30 0:10 GMT-4
I would like the f(t) to be a Sin() function.
I would like the f(t) to be a Sin() function.
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014/09/01 2:33 GMT-4
Then you can put for the parameter of the heat source that you want to vary with time just something like 'A*sin(B*t)+C', where you replace A, B and C with actual numbers, or you define them as parameters beforehand.
Then you can put for the parameter of the heat source that you want to vary with time just something like 'A*sin(B*t)+C', where you replace A, B and C with actual numbers, or you define them as parameters beforehand.
Fred Xie
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014/09/01 22:42 GMT-4

Then you can put for the parameter of the heat source that you want to vary with time just something like 'A*sin(B*t)+C', where you replace A, B and C with actual numbers, or you define them as parameters beforehand.


Thank you for your help. I understand the approach in general. However, would you please give a little more step-by-step guide?

Thanks again.
[QUOTE] Then you can put for the parameter of the heat source that you want to vary with time just something like 'A*sin(B*t)+C', where you replace A, B and C with actual numbers, or you define them as parameters beforehand. [/QUOTE] Thank you for your help. I understand the approach in general. However, would you please give a little more step-by-step guide? Thanks again.
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2014/09/02 4:53 GMT-4
Can you then maybe upload your model so that I can use that as a starting point for the steps that you have to do? And what parameter of your heat source do you want to vary with time? Temperature? Heat flux? Something else?
Can you then maybe upload your model so that I can use that as a starting point for the steps that you have to do? And what parameter of your heat source do you want to vary with time? Temperature? Heat flux? Something else?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content