Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Two Phase modelling of wax deposits
Posted 2015/01/17 10:10 GMT-5 Computational Fluid Dynamics (CFD), Mesh Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to model the shearing of wax deposits with the flow of water. I have modelled the wax deposits as a Non-Newtoninan liquid using the Carreau Model to model the drop in viscosity when the shear stress exceeds the shear strength.
I want to run the simulation for a time period of 1 s, with a time step size of 0.25e-4. However, the simulation only produces results up to 0.001 s, ending with an error: "Last time step is not converged". I have attached my model files and the error file as well. Could you please advise on how to go around this problem.
Also, when I try to add a boundary layer mesh the minimum mesh quality decreases drastically. I am currently using a physics-controlled mesh, but would like to add a boundary layer mesh and also refine the mesh to carry out a mesh dependency study.
Attachments:
Hello Afzal Ali
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.