Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The results in the second slove are still continue from the first results.

Posted 2010/06/08 2:27 GMT-4 4 Replies

Sureewan Areesinpitak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I used transient air flow in tube. When I solve in the first time, they can solve very good, but after that I changed BC and restart solve. The result in this time was not solve with initial value. The result are still continue from the first result.

My quation is 'Can I solve the problem without the first result?'
4 Replies Last Post 2010/06/08 6:25 GMT-4
Danial Tz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/06/08 3:37 GMT-4
You should "store the solution" and use it as initial condition.
You should "store the solution" and use it as initial condition.
Sureewan Areesinpitak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/06/08 5:04 GMT-4
Could you explain more? I not sure in solution.
Could you explain more? I not sure in solution.
Danial Tz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/06/08 5:17 GMT-4
I would recommend you to look at "store the solution" of solver manager in comsol manuals. There are also lot of posts on the forums.
I would recommend you to look at "store the solution" of solver manager in comsol manuals. There are also lot of posts on the forums.
Sureewan Areesinpitak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/06/08 6:25 GMT-4
Thanks you for your advice
Thanks you for your advice

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content