Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Using Time-dependent vs Frequency study for single DC pulse
Posted 2015/03/08 9:08 JST Low-Frequency Electromagnetics Version 5.1 3 Replies
Please login with a confirmed email address before reporting spam
Good day,
I am modelling a scenario where a single 100 microsecond DC pulse is passed through a coil. Is it better to use a Time-dependent study or a frequency study set to 10000Hz to model the eddy currents and the skin effect?
I am modelling a scenario where a single 100 microsecond DC pulse is passed through a coil. Is it better to use a Time-dependent study or a frequency study set to 10000Hz to model the eddy currents and the skin effect?
3 Replies Last Post 2016/06/16 18:21 JST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi:
for your question,Maybe you can use the transient solution,and You should define a time pulse function as your input.
for your question,Maybe you can use the transient solution,and You should define a time pulse function as your input.
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
which field shoud i use, i want to simulate the skin effect but with high frequency pulse DC power
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Have you solved the problem? My study has also such an exicitation.