Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Reg weak form boundary condition
Posted 2010/06/22 20:03 GMT-4 1 Reply
Please login with a confirmed email address before reporting spam
Hi All,
I have short question reg weak form on a boundary condition.
In my problem region I have conducting region and non-conducting region. My question is what would comsol assume if I do not put anything in the weak form boundary condition for the interface of the air and conducting region. Would it assume dirichlet condition (Az=0) or something else?
thanks in advance.
Subhra
I have short question reg weak form on a boundary condition.
In my problem region I have conducting region and non-conducting region. My question is what would comsol assume if I do not put anything in the weak form boundary condition for the interface of the air and conducting region. Would it assume dirichlet condition (Az=0) or something else?
thanks in advance.
Subhra
1 Reply Last Post 2010/06/23 12:45 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
the easist is normally to see what the COMSOL equations are, in 3.5 "Physics - Equation Settings - ... or turn on the equations in one of the subtabs of the preferences
Have fun Comsoling
Ivar
the easist is normally to see what the COMSOL equations are, in 3.5 "Physics - Equation Settings - ... or turn on the equations in one of the subtabs of the preferences
Have fun Comsoling
Ivar