Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Setup magnetic propoerties of permanent magnets
Posted 2010/07/15 12:17 GMT-4 2 Replies
Please login with a confirmed email address before reporting spam
2 Replies Last Post 2010/07/16 15:03 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
Sorry - I was just confused! Of course, you do not need any additional information but (Br & MUR) OR (Br & Hc) OR (Hc & MUR).
C.
C.
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
Hi
there is no one way, it depends on the info you have about your magnet.
For simple cases I usually use the Magnetisation B=mu0(H+M) (with B,H,M are all vectors), but the Remamenet Flux density or H-B curve are all possible
Good luck
Ivar
there is no one way, it depends on the info you have about your magnet.
For simple cases I usually use the Magnetisation B=mu0(H+M) (with B,H,M are all vectors), but the Remamenet Flux density or H-B curve are all possible
Good luck
Ivar