Frequency Response of a Typical Surface Acoustic Wave Delay Line
Application ID: 58871
This tutorial shows how to model an arbitrary surface acoustic wave (SAW) delay line. The design parameters are arbitrary in the sense that the outputs are far from optimal from a practical standpoint. The aim is to show how a SAW device can be set up in the software: how to define the geometry, choose a suitable mesh resolution, define IDTs and exterior open boundaries, what outputs can be extracted, and so on.
The Y- and S-parameters are obtained and validated by comparison with the semi-analytical Delta-Function model. Good agreement is demonstrated.
This tutorial builds on the Surface Acoustic Wave Velocity Calculations from a Unit Cell model, where a large set of useful parameters was obtained, including the wave velocities, the squared effective electromechanical coupling coefficient, and so on.
この model の例は, 通常次の製品を使用して構築されるこのタイプのアプリケーションを示しています.
ただし, これを完全に定義およびモデル化するには, 追加の製品が必要になる場合があります. さらに, この例は, 次の製品の組み合わせのコンポーネントを使用して定義およびモデル化することもできます.
- COMSOL Multiphysics® and
- either the 音響モジュール, MEMS モジュール, or 構造力学モジュール and
- either the AC/DC モジュール, 電気放電モジュール, MEMS モジュール, プラズマモジュール, or 半導体モジュール
アプリケーションのモデリングに必要な COMSOL® 製品の組み合わせは, 境界条件, 材料特性, フィジックスインターフェース, パーツライブラリなど, いくつかの要因によって異なります. 特定の機能が複数の製品に共通している場合もあります. お客様のモデリングニーズに適した製品の組み合わせを決定するために, 製品仕様一覧 を確認し, 無償のトライアルライセンスをご利用ください. COMSOL セールスおよびサポートチームでは, この件に関するご質問にお答えしています.
