アプリケーションギャラリ

The installation verification application can be used to help verify that your COMSOL Multiphysics® or COMSOL Server™ installation works as expected on your hardware platforms and operating systems. The app automatically loads and runs a suite of test models and compares the results with ... 詳細を見る

このアプリでは, 以下の機能を紹介します. 計算された特定の周波数で音を再生 コンボボックスから異なる材料を選択 材料の外観, 色, テクスチャを可視化 コンピューター, タブレット, スマートフォン向けに3種類のユーザーインターフェースレイアウトを選択 セカント法のカスタム実装 カスタムウィンドウアイコン 音叉を叩くと, 複雑な動作パターンで振動します. このパターンは, 固有モードとも呼ばれる共振モードの重ね合わせとして数学的に記述できます. 各モードは特定の固有周波数に関連付けられています. 音叉は, ... 詳細を見る

This model provides you with tools to build a variety of mixers by combining two common types of vessels with two types of impellers. The mixers are baffled flat and dished bottom vessels with either pitched blade impellers or Rushton turbines. The model includes three examples using the ... 詳細を見る

Joints between two components of a mechanical system are sometimes not perfectly fitting. For the ease of assembly and to allow relative movement between the components, a small gap called clearance is provided between the joining components. The presence of clearance on joints can ... 詳細を見る

This tutorial example of the pasta extrusion process shows how to simulate the non-isothermal flow of dough in the metering zone of a pasta extruder accounting for the temperature dependent material properties of the hydrated semolina dough. 詳細を見る

In complex mechanical systems, it can be challenging to find an optimal (or even good enough) solution only through engineering insight or trial-and-error procedures. Using mathematical optimization methods can then be an efficient path to a better design. In this example, a link ... 詳細を見る

DC glow discharges in the low-pressure regime have long been used for gas lasers and fluorescent lamps. DC discharges are attractive to study because the solution is time independent. The 1D and 2D models show how to use the DC Discharge interface to set up an analysis of a positive ... 詳細を見る

This app demonstrates the following: Multiple tabs in the ribbon Geometry parts and parameterized geometries Parts and cumulative selections can be used to automatically set domain and boundary settings in the embedded model Adding or removing geometry parts with different geometrical ... 詳細を見る

This model shows how to simulate a capacitively actuated surface micromachined accelerometer, using the Electromechanics Interface. It is based on a case study from the book Microsystem Design by Stephen D. Senturia (Kluwer Academic Publishers, 5th Edition, 2003, pages 513-525). 詳細を見る

この研究では, コンピュータの電源ユニット (PSU) の熱挙動をシミュレートします. このような電子機器の筐体の多くには, 電子部品が過度の高温によって損傷するのを防ぐための冷却装置が備えられています. このモデルでは, 排気ファンと穴あきグリルによって筐体内に空気の流れが生じ, 内部の熱を冷却します. 詳細を見る