アプリケーションギャラリには電気, 構造, 音響, 流体, 熱および化学分野に関連する COMSOL Multiphysics® チュートリアルおよびデモアプリファイルが用意されています. これらの例はチュートリアルモデルまたはデモアプリファイルとそれに付随する手順をダウンロードすることにより独自のシミュレーション作業の開始点として使用できます.
クイック検索機能を使用して専門分野に関連するチュートリアルやアプリを検索します. MPHファイルをダウンロードするには, ログインするか, 有効な COMSOL ライセンスに関連付けられている COMSOL アクセスアカウントを作成します. ここで取り上げた例の多くは COMSOL Multiphysics® ソフトウェアに組み込まれ ファイルメニューから利用できるアプリケーションライブラリからもアクセスできることに注意してください.
このチュートリアルでは, サーペンタイン型の流路パターンを用いた低温 PEMFC における電流分布について考察します. セルは対向流モードで動作し, 酸素と水素の入口流路は反対側に配置されます. セルが良好な性能を得るために自己加湿を利用するよう, 比較的乾燥した入口ガス組成が使用されています. 詳細を見る
In a polymer electrolyte membrane electrolyzer cell (PEMEC), the two electrode compartments are separated by a polymer membrane. Liquid water is fed to the anode side, forming oxygen gas on the anode, and hydrogen gas on the cathode side, respectively. The respective designs of the ... 詳細を見る
This example models a solid oxide electrolyzer cell wherein water vapor is reduced to form hydrogen gas on the cathode, and oxygen gas is evolved on the anode. The current distribution in the cell is coupled to the cathode mass transfer of hydrogen and water and momentum transport. Two ... 詳細を見る
At the electrode-electrolyte interface, there is a thin layer of space charge in a diffuse double layer. This may be of interest when modeling devices such as electrochemical capacitors and nanoelectrodes. This tutorial example shows how to couple the Nernst-Planck equations to the ... 詳細を見る
このモデル例では, 高温 PEMFC における反応物と水の輸送について考察します. このモデルには, 流路, ガス拡散層 (GDL), 多孔質電極における質量および運動量輸送現象, ならびに GDL, 多孔質電極, 高分子膜における電気化学電流が含まれています. 詳細を見る
The electrochemical cell shown in this model can be regarded as a unit cell of a larger wire-mesh electrode that is common in many industrial processes. One of the most important aspects in the design of electrochemical cells is the current density distributions in the electrolyte and ... 詳細を見る
This model presents a study of the current density distribution in a solid oxide fuel cell (SOFC). The model includes the full coupling between the mass balances at the anode and cathode, the momentum balances in the gas channels, the gas flow in the porous electrodes, the balance of ... 詳細を見る
This example models the flow and mass transport in the channels and the gas diffusion layer (GDL) of a polymer electrolyte fuel cell. The cathode electrode reaction is modeled as a boundary condition, where the local current density depends on the overpotential and the local oxygen ... 詳細を見る
このチュートリアルでは, 高分子電解質膜 (PEM) 燃料電池における相互に関連した電気化学反応, 電荷および化学種の輸送, そして熱伝達をモデル化します. ガス流路については, 水素アノード側には直線状の流路を, 空気カソード側にはメッシュ構造を使用します. セルは, 別の流路を流れる冷却流体によって冷却されます. 上部境界と下部境界には周期的な温度境界条件を適用し, 積層セル構成をエミュレートします. このモデルには, 電気浸透輸送 (抵抗) とメンブレインを介した水の透過も含まれています. 詳細を見る