アプリケーションギャラリには電気, 構造, 音響, 流体, 熱および化学分野に関連する COMSOL Multiphysics® チュートリアルおよびデモアプリファイルが用意されています. これらの例はチュートリアルモデルまたはデモアプリファイルとそれに付随する手順をダウンロードすることにより独自のシミュレーション作業の開始点として使用できます.

クイック検索機能を使用して専門分野に関連するチュートリアルやアプリを検索します. MPHファイルをダウンロードするには, ログインするか, 有効なCOMSOLライセンスに関連付けられている COMSOL アクセスアカウントを作成します. ここで取り上げた例の多くは COMSOL Multiphysics® ソフトウェアに組み込まれ ファイルメニューから利用できるアプリケーションライブラリからもアクセスできることに注意してください.

LiveLink™ for SOLIDWORKS®x

Electrical Heating in a Busbar Assembly

This tutorial model of the Joule heating effect in a busbar demonstrates how to synchronize an assembly between the SOLIDWORKS® software and the COMSOL Multiphysics® software, how to modify the geometry from COMSOL Multiphysics®, and how to run a geometric ... 詳細を見る

Pacemaker Electrode

This model, dealing with the current and potential distribution around one pair of electrodes, demonstrates how to synchronize and modify geometry in SolidWorks by using the LiveLink interface. 詳細を見る

Geometric Parameter Optimization of a Tuning Fork

This model computes the fundamental eigenfrequency and eigenmode for a tuning fork that is synchronized from SolidWorks via the LiveLink interface. The length of the fork is then optimized so that the tuning fork sounds the note A, 440 Hz. 詳細を見る

Bike Frame Analyzer

The reliability of a bike frame can be estimated by analyzing the structural stress subjected to different load cases. This app leverages LiveLink™ for SOLIDWORKS® to interactively update the geometry while computing stress analyses. Using this app, you can easily test different ... 詳細を見る

Stress Analysis of a Pipe Fitting from a CAD File

This tutorial model shows the setup of a 2D axisymmetric stress analysis, through contact, of a 3D threaded pipe fitting. The example involves synchronizing the 3D SOLIDWORKS® geometry and selections, which specify the faces in contact, with the 2D geometry in COMSOL  ... 詳細を見る

Set-Up Applications that Synchronize Geometry Using LiveLink for SOLIDWORKS

This example demonstrates an application that utilizes the LiveLink interface for SOLIDWORKS to synchronize the CAD design. 詳細を見る

Geometric Parameter Optimization of a Bracket

This example minimizes the mass of a bracket that is synchronized from SOLIDWORKS® via the LiveLink™ interface. There are limits both for the lowest natural frequency, and for the maximum stress in a static load case. The size and position for a number of geometrical features is changed ... 詳細を見る