アプリケーションギャラリには電気, 構造, 音響, 流体, 熱および化学分野に関連する COMSOL Multiphysics® チュートリアルおよびデモアプリファイルが用意されています. これらの例はチュートリアルモデルまたはデモアプリファイルとそれに付随する手順をダウンロードすることにより独自のシミュレーション作業の開始点として使用できます.
クイック検索機能を使用して専門分野に関連するチュートリアルやアプリを検索します. MPHファイルをダウンロードするには, ログインするか, 有効な COMSOL ライセンスに関連付けられている COMSOL アクセスアカウントを作成します. ここで取り上げた例の多くは COMSOL Multiphysics® ソフトウェアに組み込まれ ファイルメニューから利用できるアプリケーションライブラリからもアクセスできることに注意してください.
This application demonstrates how the Application Builder in the COMSOL Multiphysics® software can be used to make advanced cable modeling available to a general audience. At its core is a multiphysics model based on the technology introduced in the Cable Tutorial Series. The ... 詳細を見る
This example exemplifies how to model a Koch snowflake using the Application Builder. A more detailed description of the phenomenon and the modeling process can be seen in the blog post "Using the Application Builder to Create a Koch Snowflake". 詳細を見る
This is a model of a simple photoacoustic (or optoacoustic) resonator. A pulsating laser heats a gas causing expansion and contraction and thus creates pressure waves. Such devices are used as sensors for measuring material parameters of the gas inside the resonator. The resonance ... 詳細を見る
This model demonstrates three different ways to find the eigenfrequencies of a rectangular metallic cavity. The first method uses an eigenfrequency study step together with the Electromagnetic Waves, Beam Envelopes interface. Here, it is important to define a wave vector for the physics ... 詳細を見る
For transient acoustic problems, there are different sound pressure level metrics that have been defined in the literature and in measurement standards. These metrics are important to know when comparing results from a transient acoustic simulation to measurements from a sound level ... 詳細を見る
The aerodynamic properties of a wing, propeller, or turbine blade are to a large extent determined by the precise shape of the airfoil that is used. The NACA Airfoil Optimization application computes the two main aerodynamic properties (the lift and drag coefficients) of a fully ... 詳細を見る
This example demonstrates how to set up text files to use when preprocessing models that contain hundreds of parts. A more detailed description of the phenomenon and the modeling process can be seen in the blog post "Automate Model Preprocessing with the Application Builder". 詳細を見る
この8つのチュートリアルモデルと関連ドキュメントのセットでは, ツイスト磁気アーマーを備えた標準の3芯鉛被覆 XLPE HVAC 海底ケーブル (500 mm2, 220 kV) の抵抗, 容量, 誘導, および熱特性を調べることができます. このシリーズには, 2D, 2D axi, 2.5D, および完全な3D解析が含まれており, パフォーマンスと詳細レベルの両方を考慮すると, 最新の数値研究と同等です. 検証が含まれています. 結果は, IEC 60287 標準, いくつかの最近の論文, および解析モデルのコンテキスト内で分析されます. このチュートリアルは, ... 詳細を見る
The following example is a 2D tutorial model of a lithium-ion battery. The cell geometry is not based on a real application; it is only meant to demonstrate a 2D model setup. 詳細を見る
This example demonstrates how to couple the Lithium-ion Battery interface to the Phase Field interface for modeling electrode deformations. The example is based on the Lithium Plating with Deformation model, available in the Battery Design Module Application Library. As current is ... 詳細を見る