アプリケーションギャラリ

In this tutorial, the vibrational behavior of a small aluminum plate with four waveguide structures is analyzed. This is an example of a structural component located in a device where elastic waves are propagating, like a smart speaker, an electric motor, or a MEMS device. The plate can ... 詳細を見る

このモデルは, 9個の Tonpilz 圧電トランスデューサーを 3x3 グリッドに直線状に配置します. 3列にわたって位相変化を含む電圧が印加されます. トランスデューサーは海面下のボックス内に設置されています. 外部音響は 圧力音響 (境界要素) インターフェースを用いてモデル化され, このインターフェースは音響-構造境界マルチフィジックスカップリングを用いて振動構造と連成します. これにより, システム全体のハイブリッド BEM-FEM モデルが生成されます. 詳細を見る

This tutorial simulates a standard test and benchmark model for nonreflecting conditions and sponge layers for linearized Euler-like systems. It involves the propagation of a transient Gaussian pulse in a 2D uniform flow. The Convected Wave Equation, Time Explicit interface solves the ... 詳細を見る

In this tutorial, the propagation of elastic waves in the ground after a seismic event is simulated using a 2D model. The effect of the ground surface topology on the wave propagation is illustrated when an ideal half space is modified with the presence of a small mountain. The model is ... 詳細を見る

Solving very large pressure acoustics models in the frequency domain can be challenging. Several iterative solver suggestions exist for the default physics setups and the default quadratic Lagrange discretization. For very large models it can be advantageous to switch from quadratic to ... 詳細を見る

This application illustrates a modeling approach for deriving physically consistent simplified models in the Acoustics Module. The approach consists of converting complex sub-components to an impedance boundary condition and otherwise using simple acoustics throughout the COMSOL model. ... 詳細を見る

Diesel particulate filters (DPFs) are designed to remove and filter soot (diesel particles) from the exhaust of diesel engine vehicles. The filters in such systems are typically structured with long, air-filled channels surrounded by a porous medium that retains the soot. Although the ... 詳細を見る

In this tutorial, the acoustic radiation pattern from a small generic loudspeaker is analyzed using the boundary element method (BEM). The loudspeaker is located on a small table above the floor and at a given distance from a wall. The model is set up using the Pressure Acoustics, ... 詳細を見る

This model analyzes the scattering of a plane propagating modulated Gaussian pulse off a submarine hull. The scattered field and the spatial response are also determined. The model uses the Pressure Acoustics, Time Explicit interface to model this large acoustic model in the time domain. ... 詳細を見る

This model combines pressure acoustics and ray acoustics to perform a full frequency range analysis of the room impulse response of a small smart speaker. The source characterization in the ray tracing model is based on a full multiphysics model of the transducer and compares two source ... 詳細を見る