アプリケーションギャラリには電気, 構造, 音響, 流体, 熱および化学分野に関連する COMSOL Multiphysics® チュートリアルおよびデモアプリファイルが用意されています. これらの例はチュートリアルモデルまたはデモアプリファイルとそれに付随する手順をダウンロードすることにより独自のシミュレーション作業の開始点として使用できます.
クイック検索機能を使用して専門分野に関連するチュートリアルやアプリを検索します. MPHファイルをダウンロードするには, ログインするか, 有効な COMSOL ライセンスに関連付けられている COMSOL Access アカウントを作成します. ここで取り上げた例の多くは COMSOL Multiphysics® ソフトウェアに組み込まれ ファイルメニューから利用できるアプリケーションライブラリからもアクセスできることに注意してください.
This example demonstrate the modeling of a plug flow reactor for the synthesis of ammonia in the Haber-Bosch process. The catalytic reactor in this process operates under non-isothermal conditions, where temperature and pressure varies substantially along the length of the reactor, in ... 詳細を見る
In direct bonding, particulate contamination at the interface can significantly reduce bonding quality. Even micron-scale particles may prevent local contact and lead to large interfacial voids. This model demonstrates a 3D simulation workflow for die-to-wafer (D2W) direct bonding. The ... 詳細を見る
This tutorial shows how to model an arbitrary surface acoustic wave (SAW) delay line. The design parameters are arbitrary in the sense that the outputs are far from optimal from a practical standpoint. The aim is to show how a SAW device can be set up in the software: how to define the ... 詳細を見る
This model simulates a beam of light being split into components of different frequencies when passing through a medium where the refractive index depends on frequency. COMSOL-wise, the model showcases two important technical aspects: A user-defined implementation of the frequency ... 詳細を見る
This example shows how to create a time-limited and hardware-locked application. It is associated with the section "Time-Limited and Hardware-Locked Applications" in the Application Programming Guide 詳細を見る
This parametrized model can be used to simulate the hopping hoop problem. A rolling ring with a point mass on the perimeter can, under certain conditions, jump up from the surface on which it is rolling. A more detailed description of this model can be found in the blog post "The ... 詳細を見る
An interesting question was raised in the 1950s by the mathematician Ernst Straus that, in an arbitrarily shaped empty room with side walls made of perfect mirrors, will a point light source always illuminate the whole room? This question was answered by the Nobel Prize-winning ... 詳細を見る
This example shows how to model the behavior of a thermostat where a delay in its reaction has been implemented. A more detailed description of the phenomenon, and the modeling process, can be seen in the blog post "How to Implement a Delay in Your Thermostat Simulation". 詳細を見る
Thermally induced transformations in solids may be modeled by using an Arrhenius law to express the dependence on temperature of the transformation rate. This tutorial model shows how to use the Irreversible Transformation subfeature, available under the Solid feature of the Heat ... 詳細を見る
A small building block of integrated photonics, i.e., a Silicon-on-Insulator taper, is considered. For a larger system design, it might be useful to determine the phase delay such a device introduces. Here, we showcase the layout needed to do it in COMSOL, including a proper Port ... 詳細を見る
