アプリケーションギャラリ

真空乾燥は, 製薬業界や食品業界で, 湿った粉末から水や有機溶媒を除去するために頻繁に用いられる化学プロセスです. 真空乾燥システムを設計する際, エンジニアは製品の品質を高く維持しながら乾燥時間を最小限に抑えることを目指します. このモデルは, Nutsche 式フィルタードライヤーにおける真空乾燥を調査します. Nutsche 式フィルタードライヤーは, 湿ったケーキが充填された円筒形のドラムで構成されています. ケーキの上部は低圧のヘッドスペースにさらされ, 側壁と底壁は加熱流体にさらされます. 非常に低い圧力と高温で動作させることで, 液体の蒸発速度が増加し, ... 詳細を見る

This example demonstrates how to use temperature dependent materials within the Nonlinear Structural Materials Module. A large container holds pressurized hot water. Several pipes are attached to the pressure vessel. Those pipes can rapidly transfer cold water in case of an emergency ... 詳細を見る

The following example solves a pure conduction and a free-convection problem in which a vacuum flask holding hot coffee dissipates thermal energy. The main interest is to calculate the flask's cooling power; that is, how much heat it loses per unit time. This tutorial model treats the ... 詳細を見る

This model demonstrates how to use the Free Shape Shell feature to increase the stiffness of a shell by deforming its shape. 詳細を見る

This example illustrates how to combine different Creep material models. Here a Norton–Bailey model (primary creep) is combined with a Norton model (secondary creep). This example is a continuation of the model thermally induced creep. 詳細を見る

This tutorial example is kindly provided by Dr. James Ransley at Veryst Engineering, LLC. This model continues from the base model “A Micromachined Comb-Drive Tuning Fork Rate Gyroscope”, which is also provided by Dr. Ransley. The model demonstrates how to accurately compute the effects ... 詳細を見る

The model studies optimal material distribution in a hook, which is symmetric about the z plane and consists of a linear elastic material, structural steel. It is subjected to two distributed edge load cases: One at the tip of the hook and one along its lower inner curve. The geometry is ... 詳細を見る

A plane-wave mode feeds an axisymmetric horn radiating from an infinite baffle toward an open half space. The radius of the waveguide attached to the horn throat is assumed to be fixed, as well as the depth of the horn and the size of the horn mouth attached to the baffle. By varying the ... 詳細を見る

The mass of an aluminum beam is minimized subject to a displacement constraint and a distributed load. The problem is solved using parameter, shape and topology optimization. 詳細を見る

A cable is a structural member which has stiffness only in its tangential direction, but virtually no bending stiffness. When supported only at its two ends it deflects under gravitational load forming a curve known as catenary. This example shows how to model components such as cables, ... 詳細を見る