COMSOL Conference 2025 Proceedings
Collection of Papers, Posters, and Slideshows Accepted by the Program Committee
At the COMSOL Conference 2025, engineers, researchers, and scientists from around the globe showcased their use of modeling and simulation across all major industries and in academia. Use the Quick Search tool to find a specific presentation or filter by topic or event location.
ISBN: 978-1-7364524-3-1
Hydrogen storage in a metal hydride bed, uses an intermetallic alloy that can absorb efficiently high amounts of hydrogen by chemical bonding resulting to metal hydrides. This alloy is capable of absorbing and desorbing hydrogen while maintaining its own structure. The heat, mass and ... 詳細を見る
Experiments have been conducted with water at velocities from ~0.015-0.77 m/s to determine the permeability of 50 mm thick commercially available 30, 40, 50 and 80 Pores Per Inch (PPI) Ceramic Foam Filters (CFF) used for liquid metal filtration. Measurements were made using two different ... 詳細を見る
Designing a Radio Frequency (RF) birdcage coil used in Magnetic Resonance Imaging (MRI) at high frequencies where the wavelength is comparable with the coil dimensions is a challenging task. Before construction of the coil, not only calculating the capacitance value which is necessary ... 詳細を見る
In this paper an EMVD (Electro-Mechanical Valve Drive) for combustion engines is redesigned to achieve a fail-safe behavior when power loss occurs. The AC/DC Module and the Moving Mesh interface of COMSOL Multiphysics 4.2 are used to build up a transient model. This model also includes ... 詳細を見る
This paper presents heat transfer 3-D models of a passive refrigeration system used to improve the shelf life and the quality of the perishable fruits. Passive refrigerator system uses the changing phase to keep temperature close to the melting temperature. A multi-step study was ... 詳細を見る
Glasses are widely used in the modern industry. For high temperature the glass behaves very much like a Newtonian liquid with temperature-dependent viscosity. The goal of this study is to set a numerical procedure in order to study the glass forming process of soda-lime glasses used in ... 詳細を見る
VRALA is the ideal candidate as an Adaptive Optics actuator at visible wavelengths. Its electric characteristics variations, suitable current commands, and an effective magnetic circuit geometry provide a 2 kHz correction bandwidth and a 25 mm actuator density. The magnetic core allows ... 詳細を見る
A field of connected boreholes can be used both for cooling, heating and storage purposes. The boreholes transfer heat to or from the ground, which over time changes the temperature in the ground. It is important that the borehole field is properly sized and evaluated before the ... 詳細を見る
Photothermal therapy through Gold Nanorods (GNRs) is a new approach for the minimally invasive treatment of cancerous tissue. In order to design the proper settings, it is important to study the thermal effect that are induced close to the nanoparticle (nanoscale model), in the close ... 詳細を見る
Results presented are a contribution to the design of a 5kW-DC-AC-converter for applications in forklifts. The device is located in a closed environment and entirely operated with passive cooling. Due to concurrent engineering approach and environmental conditions correct prediction of ... 詳細を見る
