技術情報とプレゼンテーション

クイック検索

資料

ホワイトペーパーとアプリケーションノート

研究開発におけるマルチフィジックスシミュレーションの具体例

さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.

COMSOL カンファレンス 2024 論文集を見る

Search Term:

Simulation of a Buckled Cantilever Plate with Thermal Bimorph Actuators

A. Arevalo [1], D. Conchouso [1], D. Castro [1], M. Diaz [2], I. G. Foulds [3],
[1] CEMSE Division, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
[2] Physical Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
[3] University of British Columbia, Vancouver, BC, Canada

INTRODUCTION: Micro Electro Mechanical Systems (MEMS) are fabricated with an in-plane fabrication technology. Out-of-plane structures can be designed to be assembled to provide thermal and electrical isolation from the substrate [1 -3]. These isolations can potentially improve the ... 詳細を見る

Assessment of Diffuse Optical Tomography Image Reconstruction Methods Using a Photon Transport Model

M. M. Althobaiti [1], H. S. Salehi [2], Q. Zhu [2],
[1] Department of Biomedical Engineering, University of Connecticut, Storrs, CT, USA
[2] Department of Electrical and Computer Engineering, University of Connecticut, Storrs, CT, USA

Imaging of tissue with near-infrared diffuse optical tomography is emerging as a practical method to map hemoglobin concentrations within tissue for breast cancer detection and diagnosis. The accurate recovery of images by using numerical modeling requires an effective image ... 詳細を見る

Control the Poly-Dispersed Droplet Breakup Mode in a Droplet-based Microfluidic Device by External Electric Field

Y. Li [1], K. Nandakumar [1], M. Jain [1],
[1] Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA

Droplet–based microfluidics has received special research attentions in last two decades due to its superior control over fluid flow as well as other unique advantages[1]. By introducing two immiscible fluids into microfluidic systems, the reagent fluid is encapsulated inside discrete ... 詳細を見る

FEM Convergence for PDEs with Point Sources in 2-D and 3-D

M. Gobbert [1], K. M. Kalayeh [2], J. S. Graf [1],
[1] Department of Mathematics and Statistics, University of Maryland - Baltimore County, Baltimore, MD, USA
[2] Department of Mechanical Engineering, University of Maryland - Baltimore County, Baltimore, MD, USA

Numerical theory provides the basis for quantification of the accuracy and reliability of a FEM solution by error estimates on the FEM error vs. the mesh spacing of the FEM mesh. This paper presents techniques needed in COMSOL Multiphysics® software to perform computational studies for ... 詳細を見る

Finite Element Modeling of Eddy Current Probes for CANDU® Fuel Channel Inspection

M. S. Luloff [1], T. W. Krause [2], J. Morelli [1],
[1] Queen's University, Kingston, ON, Canada
[2] Royal Military College of Canada, Kingston, ON, Canada

CANDU® reactor pressure tubes (PT) contain D2O, which is used as a moderator. Surrounding the PTs are gas-filled Calandria Tubes (CT), which thermally isolate the PTs from the moderator surrounding the fuel channels. If the garter springs move apart, the PT will sag into the CT. Under ... 詳細を見る

A Systematic Method for Producing Simulated Scattered Field Data from Known Structures

R. S. Ritter [1], M. A. Fiddy [2],
[1] Olivet Nazarene University, Bourbonnais, IL, USA
[2] University of North Carolina - Charlotte, Charlotte, NC, USA

One of the greatest challenges in developing algorithms for imaging from scattered fields is the lack of suitable scattered field data from known targets. It has proved quite difficult to acquire this data from measurements in the laboratory due the fact it can be costly, time ... 詳細を見る

PA Loudspeaker System Design Using Multiphysics Simulation

R. Balistreri [1],
[1] QSC Audio Products, LLC., Costa Mesa, CA, USA

This paper utilizes lumped circuits equivalent and pressure acoustics to simulate the behavior of a PA loudspeaker in order to improve its design. 詳細を見る

Single-Phase Modeling in Microchannel with Piranha Pin Fin

X. Yu [1], C. Woodcock [1], Y. Peles [2], J. Plawsky [1],
[1] Rensselaer Polytechnic Institute, Troy, NY, USA
[2] University of Central Florida, Orlando, FL, USA

Microchannel has shown potential to dissipate high heat flux in past years [1][2]. At the same time, liquid cooling attracts more and more attention from researchers for its favorable thermal properties and ability to cool down hot and keep acceptable system temperature [3][4][5]. This ... 詳細を見る

Simulation of the Cooling and Phase Change of a Melt-Cast Explosive

W. Sanhye [1], C. Dubois [1], P. Pelletier [2], I. Laroche [2],
[1] Department of Chemical Engineering, École Polytechnique de Montréal, Montréal, QC, Canada
[2] General Dynamics Ordnance and Tactical Systems-Canada Inc., Repentigny, QC, Canada

Introduction Numerical modeling of melt-casting is becoming a popular tool for the energetic materials and explosives industry. Compared to traditional metal casting, the cooling cycle for explosive melts is significantly longer because of their high Prandtl numbers [1]. Improving the ... 詳細を見る

Numerical Investigation of Heat Transfer in an Attic Duct Model

H. Liu [1], A. Fallahi [1], J. Kosny [1]
[1] Fraunhofer Center for Sustainable Energy Systems, Boston, MA, USA

Air ducts play an important role in the energy efficiency of residential homes across the country. While transporting the conditioned air from the HVAC system to the conditioned space, 30-40% of the thermal energy can be lost due to conduction [1]. The loss of thermal energy can reduce ... 詳細を見る

最初

前

381–390 of 530

次

最後