研究開発におけるマルチフィジックスシミュレーションの具体例

さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.


COMSOL コンファレンス 2020 論文集を見る

Acoustics and Vibrationsx

Acoustical Design of Stethoscope for Improved Performance

C. Thiagarajan[1], Gururajan R.[2], A. H. Baig[2], Prema S.[3]
[1]ATOA Scientific Technologies Pvt Ltd, Whitefield, Bangalore, Karnataka India
[2]University of Southern Queensland, Toowoomba Qld 4350, Australia.
[3]RMK Engineering College, Chennai, Tamil Nadu, India

Stethoscope is in use for more than 200 years for medical diagnostics, especially for auscultation. Recently, the unprecedented growth in mobile technology revived the use of stethoscope for Telehealthcare. Digital or electronic stethoscopes are increasingly researched for use in ... 詳細を見る

Quartz Transducer Modeling for Development of BAW Resonators

L.B.M. Silva[1], E.J.P. Santos[1]
[1]Laboratory for Devices and Nanostructures, Electronics and Systems Department, Universidade Federal de Pernambuco, Recife, PE, Brasil

Transducer optimization is a key aspect for successful development and deployment of advanced sensors, especially when designing 3D structures for harsh environments. For piezoelectric transducers, plate thickness determines the operating frequency of the resonator, which is frequently ... 詳細を見る

Glass Plates Noise Transmission Suppression by Means of Distributed Piezoelectric Composite Actuators Shunted by an Active Circuit

K. Novakova[1][2], P. Mokry[2]
[1]Research Centre for Special Optics and Optoelectronic Systems (TOPTEC), Institute of Plasma Physics, Academy of Sciences of the Czech Republic, Turnov, Czech Republic
[2]Institute of Mechatronics and Computer Engineering, Technical University of Liberec, Liberec, Czech Republic

Glass windows represent a virtual sound source for buildings interior. It is very easy to make them vibrate by action of incident acoustic pressure wave. Therefore, non-negligible part of the wave is transmitted through the window. We propose and simulate a method based on the change of ... 詳細を見る

Modeling of Ultrasonic Fatigue-Life Testing Machine

D. Dimitrov[1], V. Mihailov[1], B. Kostov[1]
[1]Technical University of Varna, Varna, Bulgaria

Usually fatigue-life tests of materials are long, time-consuming and expensive. With the development of high power piezoceramic actuators nowadays it is possible to provide at very high cycles 10e10 fatigue tests (VHCF) for reasonable times, at high frequency. The ultrasonic fatigue ... 詳細を見る

Modelization of Photoacoustic Trace Gases Sensors

B. Parvitte[1], C. Risser[1], R. Vallon[1], V. Zéninari[1]
[1]GSMA - Université de Reims, Reims, France

This paper aims to demonstrate the simulation of photoacoustic signals using FEM software. The Acoustics Module of the software COMSOL Multiphysics is used to calculate the response of a differential Helmholtz resonator cell. In a second part a preliminary result obtained with the ... 詳細を見る

Two- and Three-Dimensional Holey Phononic Crystals with Unit Cells of Resonators

Y.F. Wang[1][2], Y.S. Wang[1], L. Wang[2]
[1]Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing, China
[2]Department of Mechanical Engineering, Østfold University College, Halden, Norway

We show in this paper that by careful design of the geometry of the resonators, complete bandgap with relatively low center frequency can be obtained for 2D and 3D Phononic Crystals with resonators. The generation of the bandgap is due to the local resonance of the unit cell. Spring-mass ... 詳細を見る

Designing Materials for Mechanical Invisibility Cloaks

P. Olsson[1], F. Larsson[1], A. Khlopotin[1], S. Razanica[1]
[1]Chalmers University of Technology, Gothenburg, Sweden

In solid mechanics, there is considerable interest in achieving “invisibility”. The applications in mechanics include protection of structures and parts of structures from potentially harmful transient waves and steady state vibrations. A suggested large scale application is that ... 詳細を見る

Mathematical Model for Prediction of Transmission Loss for Clay Brick Walls

J. Ratnieks[1], A. Jakovics[1], J. Klavins[1]
[1]Laboratory for Modeling Technological and Environmental Processes, University of Latvia, Riga, Latvia

A 2D numerical model for determination of sound reduction index is set up in this work. Results are in good agreement in middle and high frequency range when using solid structure approximation. Results are compared with experiment. 詳細を見る

COMSOL Analysis of Acoustic Streaming and Microparticle Acoustophoresis

H. Bruus[1], P.B. Muller[1], R. Barnkob[1], M.J.H. Jensen[2]
[1]Technical University of Denmark, Kongens Lyngby, Denmark
[2]COMSOL, Kongens Lyngby, Denmark

We have simulated the ultrasound-induced acoustophoretic motion of microparticles suspended in an aqueous solution. The full first-order thermoviscous acoustics equations have been implented on a rectangular microfluidic 2D domain excited with an ultrasound field tuned to resonance near ... 詳細を見る

Simulation of Impact Damage in a Composite Plate and Its Detection

V. Pavelko[1], I. Pavelko[1], M. Smolyaninovs[1], H. Pffeifer[2], M. Wevers[2]
[1]Riga Technical University, Riga, Latvia
[2]Catholic University Leuven, Leuven, Belgium

A problem of damage prediction in aircraft structure and its non-destructive evaluation is very important for aircraft structural health assessment. The analysis of the features of direct impact of thin-walled laminate component of aircraft was performed by COMSOL Multiphysics software. ... 詳細を見る