COMSOL Conference 2025 Proceedings
Collection of Papers, Posters, and Slideshows Accepted by the Program Committee
At the COMSOL Conference 2025, engineers, researchers, and scientists from around the globe showcased their use of modeling and simulation across all major industries and in academia. Use the Quick Search tool to find a specific presentation or filter by topic or event location.
ISBN: 978-1-7364524-3-1
Based on the heat transfer and seepage theory in porous media, a 2D cross section of a horizontal AGF project is selected and a numerical model is set up, which is based on full coupling of temperature and flow fields by combining physical interfaces of Darcy's Law and Heat Transfer in ... 詳細を見る
This paper presents a multiphysics model to the convective, conductive and radiative heat transfer for the thermoelectric modules (TEMs), which are used to convert heat flux into electrical current. The model basically consists of heat transfer in solids, heat transfer in thin shells, ... 詳細を見る
The successful implementation of a high-efficient latent heat storage system necessitates an appropriate experimental approach to investigate and quantify the variations of the Phase Change Material (PCM) thermal properties caused by its aging, as well as its potential demixing induced ... 詳細を見る
The JPM Silicon GmbH presents a novel method for the production of solar grade silicon in the microwave oven. This method can specially reduce the energy costs and increase the efficiency of the process. A numerical model is developed which depicts the physical, chemical and ... 詳細を見る
COMSOL Multiphysics® is used to simulate thermal flow experiments at out University for Applied Physics. Students have to measure thermal flow problems and verify the measurements with detailed simulations. The desired accuracy is 5% or less. The presentation will cover 3 laboratory ... 詳細を見る
Si-infiltrated SiC porous composites exist in different forms composed of cores of cellular ceramic and skin plates of ceramic matrix composites. Due to high thermal conductivity, low coefficient of thermal expansion, high elastic modulus and high strength, the final product can be a ... 詳細を見る
To obtain large transparent ceramic samples, we optimized the drying step process using COMSOL Multiphysics®. Indeed, green body's drying in a climate chamber is the critical step when large size and complex shape samples are needed. Then we obtained 75 mm diameter and 10 mm thickness ... 詳細を見る
The boundary layer flow above an isothermal flat plate inclined at a small angle to the horizontal is analyzed. Inclination effects are initially investigated as a perturbation to the horizontal flow by obtaining a fourth order series solutions valid near the leading edge of the plate ... 詳細を見る
Solder connections are one of the most essential parts of the PCBs. Despite many well-known scientific works that have been done about overlap solder interconnection properties, such as fracture, fatigue and reliability studies, little attention have been given to the investigation of ... 詳細を見る
The paper presents a student guide on how to implement surface to surface radiation within COMSOL Multiphysics® software for case studies found within the built environment. We included four benchmarks: (1) Radiation in a triangular cavity with infinite length; (2) Radiation between two ... 詳細を見る
