COMSOL Conference 2025 Proceedings
Collection of Papers, Posters, and Slideshows Accepted by the Program Committee
At the COMSOL Conference 2025, engineers, researchers, and scientists from around the globe showcased their use of modeling and simulation across all major industries and in academia. Use the Quick Search tool to find a specific presentation or filter by topic or event location.
ISBN: 978-1-7364524-3-1
Laser surface texturing has emerged as a promising texturing technique due to properties such as excellent repeatability, non-contact process, the ability to achieve small-size features and high-quality finishing. The work described here is part of the H2020 research program called SHARK ... 詳細を見る
This work describes the implementation with COMSOL Multiphysics® of a thermal simulation of a space environmental chamber, the SpaceQ chamber [1]. Space environment facilities are needed to simulate on Earth the expected performance of hardware and instrumentation that shall operate in ... 詳細を見る
In this poster we present the results of the strategy for calibrating the COMSOL Multiphysics® model to simulate the laser bonding process (LADB) of Mems chips. A specific aspect of this work is to calibrate the COMSOL Multiphysics® heat model loss by measuring with a miniature ... 詳細を見る
Ball bearings are used in vast majority of mechanisms for space applications (such as Solar Array Drive Mechanisms, pointing mechanisms or reaction wheels) in order to provide low friction and smooth motion between parts. These applications differ from the ground ones due to space ... 詳細を見る
Investment casting is practised in both the automotive and aerospace industries, to produce casted components where a high-quality surface finish is critical. Vacuum induction melting (VIM) and direct pouring into an investment casting shell mould is an advantageous manufacturing ... 詳細を見る
This study is focused on the optimization of a- YBa2Cu3O7-x (YBCO) based bolometer working above 77 K. The temperature distribution on the superconductor surface and the temperature profile through the whole system (bolometer plus plate with heaters) were studied at the working point ... 詳細を見る
It is a fact that IEC 60287 standard introduces important errors in the computation of the armor losses of submarine three-core lead sheathed armored cables, since the twisting of phases and armor wires is not considered. This results in an overestimation of cable size, and hence its ... 詳細を見る
In automotive and construction markets, the quest for high strength to weight ratio components is continuously increasing. Therefore, reducing the rejection level of the heat treated advanced high strength steel (AHSS) strips is an active research area. In this study , the evolution of ... 詳細を見る
There is an increasing demand for aerosol devices from E-cigarettes to drug delivery devices with precise dosage. [1][2] The aim of this article is to investigate a Poly-Si micro heater in a vapor generator device. In order to calculate the amount of vapor production, temperature ... 詳細を見る
Corrosion marks were found in specific areas on the outer wall of a process container. The container is cooled by a spiral cooling jacket. The corrosion marks were found in the lower and upper circumference of the container and also in the areas adjacent to the water inlet and outlet. ... 詳細を見る