研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL Conference 2024 論文集を見る
The paper presents a methodology to account for local mean-flow effects on thermo-acoustic instabilities to improve typical calculations performed under the zero-Mach number assumption. A 3D FEM model of a simplified combustor is solved with COMSOL Multiphysics® Pressure Acoustics ... 詳細を見る
The aim of this work is the numerical study, by finite element analysis using COMSOL Multiphysics®, of the heat transfer and working temperature field of a photovoltaic panel under realistic wind and irradiation conditions. It is well-known that a great portion of the solar radiation ... 詳細を見る
Electron beam has a wide range of applications in the material processing and joining techniques. Apart from that, it has also been utilized to simulate steady as well as transient fusion reactor relevant heat loads. Transient heat load events spontaneously occur in the fusion reactor. ... 詳細を見る
Materials with an order variable in thermal conductivity as a function of temperature are desirable for thermoelectric heat energy recovery, building thermal insulation and solar thermal applications. Thermal Conductivity is an inherent material property. Engineering the fundamental ... 詳細を見る
在新能源汽车中应用GaN表贴器件能够极大提升车载电源的功率密度，提高生产效率，而汽车中高温、高湿、高压的极端应用环境对器件所使用的环氧塑封料提出了更高的防潮耐温要求。本文首先基于菲克扩散定律，采用吸湿试验与COMSOL有限元仿真相结合的办法，对两种常用环氧塑封料的吸湿扩散特征进行了研究，得到相关的湿气扩散特征参数；然后利用COMSOL中的稀物质传递、固体传热、固体力学等模块，对TOLL外形塑封器件在湿热环境中的湿气扩散行为及湿热应力分布进行了模拟；最后基于实际应用，分别对两款环氧塑封料塑封的GaN TOLL器件进行了MSL以及HAST可靠性验证。研究结果表明 ... 詳細を見る
在LNG储罐内常压低温（-162℃）环境条件下，下层液态天然气与上层甲烷等气体（BOG）处于气液两相平衡状态。当储罐泵井底部LNG低温泵需要检维修时，出于安全考虑，需要向泵井内先通入氮气以吹扫置换BOG气体，在后者低于一定浓度后方可打开泵井上方井盖进行吊装作业。本研究建立了LNG储罐泵井中氮气置换BOG的二维动态模型，模拟气液相界面上方气体流动、混合与传质传热现象，并耦合了甲烷/氮气混合气体热力学模型、高温差下浮力效应与LNG在相界面的气化量，对模型关键参数的影响进行数值分析，如氮气流量、气液相界面高度和吹扫气体出口位置等。模拟结果显示，当吹扫氮气温度为20℃，流速为0 ... 詳細を見る
Graphene, as a two-dimensional material with exceptional physical and chemical properties, exhibits highly tunable optical absorption within the visible spectrum. Its absorption is sensitive to polarization, the number of layers, and incident angles, making it an ideal candidate for ... 詳細を見る
This study investigates the thermal deformation process in Surface Thermal Lensing (STL), a non-destructive technique used to characterize optical materials based on their absorption properties. A fused quartz sample (10mm10mm3.3mm) was modeled with adiabatic free boundaries on the upper ... 詳細を見る
To address the challenge of combining high filtration efficiency with thermal insulation, a 3D nanofibrous sponge with curly fibers, hierarchical porosity, and ultralow density was fabricated via electrospinning. The material exhibits excellent filtration performance, low air resistance, ... 詳細を見る
宽波段 X 射线望远镜（Wide band X-ray Polarization and imaging Telescope, WXPT）是新一代空间卫星探测项目，其科学目标是通过宽波段X射线观测，揭示黑洞，中子星等致密天体的高能辐射机制和宇宙中的极端物理过程。其预计装配多种类探测器组合探测至 500keV能段，其科学目标是通过宽波段X射线观测，揭示致密天体的高能辐射机制和宇宙中的极端物理过程。超导边沿转变探测器（Transition edge sensor,TES）因其极为优异的能量分辨性能，成为WXTP项目在3-60keV能段探测的有力竞争者 ... 詳細を見る