技術情報とプレゼンテーション

The adoption of micro- and nanostructured electrodes is a promising technique to improve the performance of Li-ion battery, which increases the electrode surface area and improves the efficiency of ion exchange between the electrode and electrolyte. This performance improvement is ... 詳細を見る

This study aims to numerically investigate on a passive solar system for indoor heating called as \"Trombe wall\". The transient buoyancy driven flow characterizing that system and the thermal distribution are solved by numerically integrating the governing equations in COMSOL ... 詳細を見る

The fixed beds have the advantage of large heat transfer area, for they are used in some designs of innovative nuclear reactors as the reactor FBNR. Inside of study of fixed beds is important to define the following parameters: flow minimum and velocity profile of cooling fluid, ... 詳細を見る

Heat and mass transfer through a gypsum board exposed to fire is simulated and compared to experimental data. The gypsum board is modeled as a porous medium with moist air in the pores. A dehydration front develops at the fire side and travels through the board, consuming energy and ... 詳細を見る

Bionics is the scientific discipline between biology and technology. The aim of bionics is to recognize natural design principles and derive technical solutions. Natural structures have been optimized over generations by evolution. In most cases the minimization of the energy demand is a ... 詳細を見る

A design method for BHE fields in the absence of groundwater flow is presented, based on the superposition of effects. The effects of any periodic heat load with a period of one year can be obtained by a weighted sum of the effects of a monthly unit step heat load, properly displaced in ... 詳細を見る

CFD simulations were carried out to predict the convective heat and mass transfer coefficients in the rice bed, and correlations were developed for the convective heat and mass transfer coefficients as a function of drying air flow rate. The developed correlations were used to extend the ... 詳細を見る

When concrete is subjected to high temperature, capillary water evaporates and chemically bound water is released due to dehydration. This results in an increase of pore pressure, which is believed to be one of the mechanisms leading to spalling. Spalling of concrete is of high concern ... 詳細を見る

This study is to investigate the velocity pattern and the velocity magnitude of the cuttings that is being processed in the process mill as a result of the rotating hammers. The process mill consists of a horizontal cylindrical shell equipped with renewable liners and rotating hammers ... 詳細を見る

For the numeric investigations of the high temperature compact heat exchanger two numeric models with and without the regards of the velocity field development were used. The results of the comparison of the numeric and experimental data confirm the necessity of regarding the velocity ... 詳細を見る