技術情報とプレゼンテーション

In this study, a model of in-situ geothermal energy piles was constructed using COMSOL Multiphysics® software. Geothermal energy piles serve two purposes, first to transfer building load into the subsurface, but also to extract thermal heat from surrounding soils. This is achieved using ... 詳細を見る

This study analyzed the laser powder bed additive manufacturing process. The laser is modeled as a moving heat source with time dependent heat transfer causing local, transient melting of the metal powder. Heat transfer is considered to take place due to convection in the molten metal ... 詳細を見る

Human made mechanical resonators have been around for a thousand years. Early applications included musical instruments and chronographs operating in millihertz to kilohertz frequencies while more recent interest has turned ultra-high frequency resonators and oscillators suitable for ... 詳細を見る

Breast cancer detection is one of the most important problems in health care and it is second most frequent cancer according to WHO. It is recommended that women over fifty or even younger in some cases do a screening test every two years. Besides clinical breast examination, there are ... 詳細を見る

Combustion instability in solid rocket motors and liquid engines has long been a subject of concern. Recent advances in energy based modeling of combustion instabilities require accurate determination of acoustic frequencies and mode-shapes. Of particular interest is the acoustic mean ... 詳細を見る

Ultrafast terahertz photoconductor devices, especially photomixers, are usually limited in output power by device failure thought to be caused by excessive temperatures. Therefore, understanding of thermal breakdown is essential to the study of device reliability and failure of ... 詳細を見る

In our study of chaotic mixing, 3D velocity measurements (u,v,w) are required for evaluation of a micro mixer using a mix-prediction algorithm. The hybrid approach presented here combines 2D measurements, an imperfect numerical model, and appropriate fitting parameters. Because our ... 詳細を見る

Viable design alternative for the existing and fast growing UAVs which are optimized for unmanned flight is of great demand. Designing of a small scale UAV alternative to the AAI Aerosonde UAV has been considered changing the wing tail configuration of the vehicle analyzing both ... 詳細を見る

The traditionally magnetic design process involves guessing at a reasonable conductor geometry, using finite element analysis (FEA) software to calculate the resulting fields, and modifying the configuration iteratively to reach an acceptable solution. Taking the opposite approach, we ... 詳細を見る

We have created and optimized a multiphysics model in COMSOL Multiphysics® software that studies sensitivity to ectopeptidase rates in the rat hippocampus. Ectopeptidases are membrane-bound enzymes whose catalytic domains face the extracellular space (ECS) (Figure 1). They have ... 詳細を見る