技術情報とプレゼンテーション

Dilution’s issue during dry machining have raised the interest’s environmental researchers and engineers. In fact, the sampling of dust emitted during dry machining was a serious problem for air quality evaluation at the workplace. Furthermore, the best sampling of fine and ultrafine ... 詳細を見る

Although there are porous media and subsurface flow modes available in a toolbox of COMSOL Multiphysics®, some common requirements in hydrogeological models can not be easily accessed in the graphical user interface. Most crucially, there is no distinction between confined and unconfined ... 詳細を見る

During the last decades, mid-IR (3-12µm) laser sources have attracted attention due to their potential applications in different fields like infrared counter-measures (e.g: missile jamming) and remote chemical sensing. In this context, Onera has been working on the development of non ... 詳細を見る

In a hydronic space heating system the heat output arises from natural convection and radiation from the radiators. In order to increase the heat output, without replacing the radiators with larger ones, or increasing the temperature level, the radiator can be equipped with add-onfan ... 詳細を見る

Knowledge of the effect of fractures on fluid flow and transport is of great interest in many fields. In radioactive waste disposal the interest in fractures within concrete structure is because they are mostly more permeable than the matrix, there is less or no sorption and because long ... 詳細を見る

This paper presents preliminary estimations of CO2 overpressure into the reservoir and CO2 leakage through the caprock and the overburden. A simple, two-phase flow model in porous media based on Darcy’s law was used, in order to explore easily long time periods. The models produced by ... 詳細を見る

Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical systems for advanced vehicle applications. Dr. Dede received his Ph.D. and B.S., ... 詳細を見る

Ectopeptidases are commonly accepted to be a means of clearing active peptides. However, studies have shown that they can also regulate peptide activity. We have developed a technique of electrokinetic push-pull perfusion (Ek-PPP, Figure 1) to examine this largely unexplored mechanism of ... 詳細を見る

A requirement of the building envelope is to act as environmental separator. Energy is one component that we sometimes wish to control. How can this yield passive benefits such as solar heating? This research focuses on control of thermal radiation energy, and the role windows play ... 詳細を見る

Transformers, as any other industrial products, have to comply with various requirements on noise levels. Three main sources of noise can be identified in transformers: no-load noise or core noise generated by magnetostriction in the core steel laminations, load noise produced by ... 詳細を見る