技術情報とプレゼンテーション

Introduction The echolocation signals of dolphins consist of forward-projected sound pulses that reflect off objects and are used to probe underwater surroundings. Despite rigorous studies of dolphin echolocation, there remain questions about how echolocation sounds are produced and ... 詳細を見る

Polydimethylsiloxane (PDMS) is a biocompatible material widely used in biomedical applications such as implantable sensors. A realistic modeling of PDMS in acoustic-mechanic simulation is useful especially for medical applications which use ultrasonic waves as interrogation source. ... 詳細を見る

Simulations usually depend on a variety of parameters like geometric dimensions, process parameters, loads, or material properties. Typically, some of these parameters are fixed whereas others may be varied to obtain a special result. In many cases a simple sweep can be used to examine ... 詳細を見る

The design of products in the audio industry is to a large extent done via a combination of prior knowledge and trial-and-error. Such an approach will sometimes be seen described as an ‘optimization’ of said products, but we will here focus on the formal mathematical approach of ... 詳細を見る

This work is focused on the development of a physical-mathematical model capable of predicting the temperature and water content fields within a pasta sample which is exposed to a stream of drying air flowing under turbulent conditions. Therefore, the equations concerning the transfer of ... 詳細を見る

A novel injection molding tool temperature control system based on heat pipes is being researched at the Bielefeld University of Applied Sciences and Arts (HSBI). This temperature control technology offers great potential for improving product quality and saving energy in the production ... 詳細を見る

When dealing with space and aerospace equipment, their ability to withstand the strong excitations produced during the launch must be tested by the manufacturers according to international standards requirements. In fact, structural subsystems of the rockets are commonly released by ... 詳細を見る

There are different possibilities to simulate a bolted joint. If only the connection of parts in an assembly with the stress distribution and surface pressure between the components without the bolt itself is of interest, the thread of the bolt is omitted and only the effect of bolted ... 詳細を見る

Simulation of laser processes are more and more efficient. In some cases, as welding and additive manufacturing, the physical phenomena are complex, multi-physics and multi-phases, thus some assumptions have to be done. For Laser Powder Bed Fusion, a laser beam melts and vaporizes the ... 詳細を見る

Many (photo)electrolytic devices involve the generation of bubbles (e.g., hydrogen, oxygen). In these devices, bubble coverage on the surface of the electrode not only decreases the active area, but also induces optical loss.[1,2] Efforts in understanding the bubble detachment process ... 詳細を見る