技術情報とプレゼンテーション

A good approximation of rough surfaces and their random behaviour is very important in some engineering problems. Fractal modelling provide an alternative to generate rough surfaces based in statistically self-similar non-Euclidean geometries, as seen in [Fig. 1]. Through a frequency ... 詳細を見る

Today a horn driver developing is still time and cost consuming. In addition compression driver behavior depends by the horn profile. In this study is proposed a new technique to model a combination of an existing compression driver and a virtual horn, in order to predict the horn driver ... 詳細を見る

Teledyne Marine developed a system for the long-range ocean acoustic tomography, which uses a tunable, high-efficiency sound resonator. The high-Q resonator tunes to match the frequency and phase of a reference frequency-modulated signal. The analysis of a high-Q resonant organ pipe with ... 詳細を見る

This paper reports the modelling and analysis of three dimensional negative dielectrophoretic traps for cell trapping applications. Dielectrophoresis is a well-established technique for cell analysis and cell trapping. Planar electrodes, at the bottom of a microfluidic channel, have been ... 詳細を見る

The calculation of additional losses in induction machines is a challenging task. In skewed motors, a part of these losses is connected to the phenomena of inter-bar currents. Inter-bar currents flow between adjacent bars through the rotor lamination. Since they are aligned perpendicular ... 詳細を見る

Metamaterials are periodic or quasi-periodic, sub-wavelength metal structures. The material properties are derived from its structure rather than inheriting them directly from its material composition. 詳細を見る

Loudspeaker drivers are energy transducers: their main goal is to efficiently convert electrical energy to acoustic energy (sound), through the movement of mechanical parts. As such, they are prime candidates for the application of multiphysics methods and tools. The talk will outline ... 詳細を見る

Acoustic streaming (AS) describes a physical phenomenon where an oscillating sound emitter induces a steady fluid motion. Metal processing industry applies this treatment for grain morphology adjustments during the solidification of metal. Improvement and further development of this ... 詳細を見る

Surface and solution kinetics for redox systems can be reliably and accurately studied using hydrodynamic electrochemical methods, particularly a rotating disk electrode (RDE). The RDE consists of a disk electrode usually made of glassy carbon or noble metals imbedded in a rod of ... 詳細を見る

Introduction: RFID system uses a Transponder and the near field communication (NFC) antenna and a matching circuit (Figure-1) in which at least latter two must be optimally designed for a higher efficiency. Typically, RFID antennas are flat inductive coils with 2 to 4 turns and are ... 詳細を見る