技術情報とプレゼンテーション

Laminated media are intended to conduct the magnetic flux in the plane (high resistance to limit the eddy currents). When fringing flux falls in perpendicularly to the plane, the surface for the eddy currents is no longer small. This will cause eddy current losses, which will reduce the ... 詳細を見る

In the field of electric machines, a trend towards both higher efficiency and higher power density is observed. This has led to a growing importance of Permanent Magnet Synchronous Machines. However, the magnets used in these machines risk demagnetization at high temperatures. Especially ... 詳細を見る

The 3D unit cell model approach offers an efficient tool to analyze the influences of geometrical design (channel shape and arrangement, filter length, wall thickness) and filter material properties (permeability, soot loading characteristics) on the performance of ceramic particle ... 詳細を見る

The paper investigates the hydrodynamic performance of a hierarchical parallel channel network for the objective of optimal thermal coupling to heat released in the adsorption processes, as in adsorption heat pumps. More specifically, the uniformity of the fluid flow over the network is ... 詳細を見る

This paper presents the modeling and simulation of an asymmetric thermoelectric module. The thermoelectric module is characterized by a novel module design and a lager temperature range than conventional high-temperature modules. The materials are boron carbide and titanium diboride ... 詳細を見る

The Swedish Nuclear Fuel and Waste Management Company (SKB) operates the underground repository for low- and intermediate-level nuclear waste (SFR) located in Försmark, Sweden. An extension of the SFR is planned to accommodate mainly waste arising from the decommissioning of Swedish ... 詳細を見る

A sharp tip approached perpendicular to a conducting surface at subnanometer distances and biased with a small voltage builds a junction across which electrons can be transferred from the tip apex to the nearest surface atom by direct quantum mechanical tunneling. Such a junction is used ... 詳細を見る

In this work the innovative concept is the use of a Cu based metallic foam, characterized by open cell structure, as active element for heat exchangers. The metallic foam, produced by liquid infiltration method, was introduced inside a Cu tube, as base element for the exchanger. In the ... 詳細を見る

The use of optical sensors in the industry is still growing. A transmission of signal from the sensors is mostly done by optical fibers. Switching the signals from optical paths may be done by using micromechanical silicon switches. The main advantage is an ability to transmit data from ... 詳細を見る

Ferrofluids have been successfully used in the seals for rotary shafts, but few studies focus on the reciprocating motion seals. Since the completely different operational regimes, previous experiences on the rotary motions could not be directly applied on the cases for reciprocating ... 詳細を見る