技術情報とプレゼンテーション

Aluminum production potlines operate under significant amperage in a range of 200 kA – 600 kA. High electrical DC currents induce strong magnetic fields. MHD stability, which is a result of electrical current and magnetic field interaction within aluminum reduction cell, is one of highly ... 詳細を見る

INTRODUCTION: The paper illustrates the use of COMSOL for obtaining the solution Ψ(x,y,t) as a solution to the time dependent nonlinear Schrödinger equation (NLSE). COMSOL previously was used to solve the time dependent NLSE in Ref.[1] as applied to quantum mechanics, however this is the ... 詳細を見る

This paper presents results on the visualisation of tracks of charged particles in a non-uniform magnetic field. The field modelled is that generated by a coil driven by DC current. The motion of typical particles, such as electrons, ions and multiply-charged heavy particles has been ... 詳細を見る

One of the major applications for dielectrophoresis is the selective trapping and fractionation in lab-on-a-chip devices. Nevertheless, many-particle effects due to high concentrations of biological material around electrodes can cause a rapid decrease of trapping efficiency in ... 詳細を見る

The transfer molding process is a widely used method for encapsulating microelectronics and power semiconductor devices. In power electronics, it is gaining increasing importance, particularly in the automotive sector [1]. In transfer molding, an epoxy mold compound (EMC) is injected ... 詳細を見る

Recognized for its potential as a sustainable food source, seaweed farming has become pivotal in tackling future food security concerns, necessitating innovative solutions to achieve optimal, high-yield, and commercially viable production [1]. This work addresses gaps in aquaculture ... 詳細を見る

Microplastic contamination in sediment samples presents analytical challenges, as microplastic concentrations typically remain below 1% in environmental matrices [1]. Current analytical workflows require cost-effective and rapid pre-separation methods to concentrate microplastic ... 詳細を見る

PECM is a necessary extension to traditional ECM for some high-performance materials. Electrolyte flow in the inter-electrode gap (IEG) can be assisted using a magnetic field to allow higher currents, but this creates a magnetohydrodynamic flow. This paper presents a study of flow ... 詳細を見る

Efficient mixing and pumping of liquids at the microscale is a technology that is still to be optimized. The combination of an AC electric field with a small temperature gradient leads to a strong electrothermal flow that can be used for multiple purposes. Combining simulations and ... 詳細を見る

This study presents a combined simulation and experimental investigation of mixing performance in a batch mixer, with the goal of validating simulation results and identifying optimization potential. The focus is on evaluating mixing times and flow fields to enhance process efficiency, ... 詳細を見る