研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL Conference 2024 論文集を見る
随着碳纤维增强复合材料(CFRP)在航空等领域的应用规模逐渐扩大，其低电导率带来的雷击风险得到广泛关注，CFRP雷击防护设计已成为研究热点，而雷电环境多理场仿真技术也在CFRP雷击防护设计中逐步发挥作用。目前，针对含雷击防护（如铺设防雷金属网）的CFRP平板结构雷击直接效应仿真研究已有一定成果，但是，对于铺设防雷金属网的CFRP-金属紧固件连接结构的雷击仿真鲜有研究。 本研究以铺设防雷金属网的CFRP-金属紧固件连接结构为研究对象，借助COMSOL Multiphysics重点分析了连接结构遭受雷击时的电-热多物理场效应。 ... 詳細を見る
Exciting plasma in inductive mode is attractive due to the high electron density and the absence of ion interaction with the reactor walls. However, any real system excites plasma at low power in capacitive mode with strong interaction with the walls. The transition from one mode to the ... 詳細を見る
In the manufacturing of high voltage electrical equipment, an important step to guarantee a right dielectric design can be carried out through the prediction of a possible occurrence of the corona effect or, in the worst case, of dielectric breakdown, preferably in early stages. For this ... 詳細を見る
In the manufacturing of high voltage electrical equipment, an important step to guarantee a right dielectric design can be carried out through the prediction of a possible occurrence of the corona effect or, in the worst case, of dielectric breakdown, preferably in early stages. For this ... 詳細を見る
Radio frequency (RF) heating have potential as alternatives to chemical fumigation for disinfesting legumes. This study was conducted to investigate the feasibility of RF selective heating of insect larvae in 3 kg soybeans packed in a rectangular plastic container using a 6 kW, 27.12 MHz ... 詳細を見る
Sea ice is an important indicator for global climatic changes. Synthetic Aperture Radar (SAR) has been extensively used to monitor sea ice due to rough weather conditions in remote Arctic area. To better understand how SAR signal interacts with the sea ice, Electromagnetic Modeling (EM) ... 詳細を見る
There is an increasing demand for aerosol devices from E-cigarettes to drug delivery devices with precise dosage. [1][2] The aim of this article is to investigate a Poly-Si micro heater in a vapor generator device. In order to calculate the amount of vapor production, temperature ... 詳細を見る
Abstract. A Laser Focusing system (LFS) focuses a single laser beam (single Channel) or multiple laser beams (multi - channel) onto a surface (Specimen). The general motive of a LFS is to focus a train of brief pulses or a continuous beam of light onto a Specimen which heats up its ... 詳細を見る
电磁辐射对燃油危害是加油站、炼油厂、油气基地等大型设施禁用手机和其他无线通讯设备的重要原因。不同于静电对燃油蒸气的危害，本文的研究重点在于分析不同频率下的射频放电击穿特性。基于射频等离子体鞘层模型，通过多物理场仿真，分析了12M~300MHz频率下的氩气射频放电过程。仿真结果表明，当激励频率大于雪崩击穿临界频率时，两侧极板附近会形成随激励周期变化的鞘层区，中心区域为准电中性的等离子体区。同时，当激励频率远小于等离子体频率时，鞘层会促进极板附近的γ电离过程；随着频率增大，鞘层特性会逐渐退化，而中心区域的α电离过程会增强。此外，放电特性曲线表明，频率越高，板间放电电压越小 ... 詳細を見る
Additive Manufacturing is revolutionizing the industrial sector for complex and individualized metallic components. The most limiting factor of the widely established laser beam melting technology is the scan velocity due to inertia of the mirrors [1]. In electron beam melting (EBM), ... 詳細を見る