技術情報とプレゼンテーション

The article deals with the magnetically-supported high-power full-penetration laser beam welding of aluminum. A stationary simulation was conducted accounting for the effects of natural convection, Marangoni convection and solid-liquid phase transition as well as an electromagnetic ... 詳細を見る

An industrial pulp screen is investigated. The dilute pulp is pumped through a screen barrier. In order to avoid the fiber network to plug, it is necessary to 1) fluidize the shear thinning pulp 2) expose the barrier with plug releasing pressure pulses. This work involves a 2-step ... 詳細を見る

The construction of high magnetic field superconducting coils requires the use of low temperature superconductors that must be cooled down to liquid helium temperature (4.2 K). Natural two-phase convection loops, i.e. thermosiphon loop, are used as cooling system for large ... 詳細を見る

A micro Planar Ion Mobility Spectrometer (P-FAIMS) has been simulated using multiphysics software. In P-FAIMS target ions are discriminated by the application of the proper separation voltages to the electrodes of the system. Modelling of vapour phase ions of two compounds have been ... 詳細を見る

Electric fields are present in biological systems at multiple spatial and temporal scales. Electroosmotic flow results from the action of electric field on the electrical double layer, formed at the fluid/solid or fluid/membrane interface and characterized by its zeta-potential. For the ... 詳細を見る

The aim of this article is to demonstrate the capability of the software for predicting free-surface motion and internal fluid flow in an electromagnetically levitated sample of liquid metal. Multiphysics solutions which demonstrate the usefulness of Comsol as a powerful MHD simulation ... 詳細を見る

COMSOL Multiphysics is offering an important alternative to home codes for modeling and simulation of complex problems with including coupled effects on heat and mass transfer. The present work focuses on low Prandtl number fluid melts subject to symmetry breaking and transition to ... 詳細を見る

Silicon solar cells are produced in a series of different process steps in which wet-chemical etching and rinsing steps have a considerable influence on the quality of the wafers. Etching baths are used for surface structuring or intended etch back. Examples therefore are texturing, ... 詳細を見る

Fuel bundles in the CANDU (CANada Deuterium Uranium) reactor are designed for heating a pressurized coolant (heavy water) to generate electricity. The designs for the fuel bundles differ based on the number of heating elements. The flow of heavy water over the elements and inside the ... 詳細を見る

This study presented the results of 3D unsteady CFD simulations to investigate the influence of adding a flat baffle plate at the entrance during the discharging operation on the flow behaviour, thermal stratification, and performance of a hot water storage tank installed in solar ... 詳細を見る