技術情報とプレゼンテーション

In the molding industry, high productivity rate, low energy consumption, large 3D parts, and homogeneous temperature distribution are the main targets. The 3iTech® inductive technology developed by RocTool ensures both good temperature homogeneity and short heating time. Conventionally, ... 詳細を見る

The confinement clean rooms used in industry are susceptible to higher count of particles per cubic meter of air after the usual work program. To decrease the economic and technological effects of particle concentration a micro-cleaning device was elaborated. A first approach of a 3D ... 詳細を見る

Wind speed measurement is a very important factor in various fields such as aeronautics, meteorology and farming. The conventional wind sensor comprises of small mechanical apparatus such as propeller and cup anemometers, or consists of thermal element such as hot wire anemometers, or ... 詳細を見る

For design of radial flow fixed bed reactors, it is important to ensure proper flow distribution through the catalyst bed. A 2D axisymmetric model of a radial-flow reactor was used to evaluate flow maldistribution through the catalyst bed and the pressure drop through the reactor for a ... 詳細を見る

COMSOL Multiphysics was used to simulate the heat flux from battery cells via conjugate heat transfer physics which consist of laminar flow and heat transfer in solids and fluids. Laminar flow function was used to simulate natural convection of air within the sealed enclosure. Heat ... 詳細を見る

During Physical Vapor Transport (PVT) growth of single 4H-SiC crystal and subsequent cooling down, thermal stresses lead to the multiplication of dislocations that are non-desirable for the semiconductor applications of this material. These dislocations induced by thermal stresses could ... 詳細を見る

A model for CO2 storage is presented. It is shown that the system is highly dynamic, i.e. results depend strongly on parameter disturbances and numerical features. However, a series of scenario calculations shows that there are invariants, most important: the duration of the early ... 詳細を見る

Classical hydraulic dampers are flexible devices that are used to attach a component to a mounting base. Vibration amplitude reduction can be achieved by improving the old technique of suspension by bringing in application of Magnetorheological or Electrorheological fluid in it. Due to ... 詳細を見る

Studies of the liquid metal movement (hydrodynamic) in a real object (tundish) are substantially precluded due to the objective difficulties (high temperature and the size of metallurgical equipment), compared to their execution by the use of physical and numerical modeling. In presented ... 詳細を見る

Heat transfer inside a refrigerated truck is a key phenomenon that governs the temperature inside the truck and the regulation of the cooling system. Up to now, a lot of experimental studies ([Tso et al., 02]) have been carried out to assess the effect of opening the door and to minimize ... 詳細を見る