技術情報とプレゼンテーション

Enhanced operational flexibility and low levels of pollutant emissions are achieved with a sequential arrangement of premixed combustion stages in gas turbines for power generation. In the second – reheat – combustion stage, hot flue gases of approximately 1500K are enriched with fuel ... 詳細を見る

In this numerical study, surface acoustic waves (SAWs) are evaluated as a potential disruptive flow technology for enhancing heat transfer in microchannels. Using COMSOL Multiphysics® software, the physics governing acoustics, single-phase-fluid flow and heat transfer are coupled. The ... 詳細を見る

We demonstrate a simple example about how to design my own algorithm for Navier-Stokes equation by weak form PDE and LiveLink™ for MATLAB®. After the computation, we get the same solution as other FEM packages (FreeFEM++ & FeniCs) at each iterative step, and we can see the Navier ... 詳細を見る

This paper utilizes lumped circuits equivalent and pressure acoustics to simulate the behavior of a PA loudspeaker in order to improve its design. 詳細を見る

Metal foams are interesting materials with many potential applications. They are characterized by a cellular structure represented by a metal or metal alloy and gas voids inside (Fig.1). A common metallic cellular material is aluminum foam which can be produced metallurgically by heating ... 詳細を見る

In the Collaborative Research Centre 692 at TU Chemnitz several academic institutions work on aluminum matrix composites (AMCs). These materials consist of an aluminum matrix, which is reinforced by SiC or Al2O3 particles with dimensions less or equal 1 µm. One main task is finishing ... 詳細を見る

Deformation prediction is an important part of the structure stability analysis. However, the deformation of bank protection structure which is affected by many factors, such as structural stiffness, earth pressure and hydrostatic pressure. It contains a complex mechanical process, which ... 詳細を見る

This work aims at the modelling of a 5 cm^2 Direct Methanol Fuel Cell (DMFC) with mixed serial/parallel serpentine flow fields in terms of current/voltage behavior. One of the main challenge to overcome consists on lowering the so-called methanol cross over from the anode through the ... 詳細を見る

For the lack of higher order modes, lumped element (LE) models currently used may be insufficient to predict the system of balanced-armature receiver (BAR). We develop a LE multimode model for BAR in the frequency domain based on the techniques of mode decomposition, truncation, and ... 詳細を見る

Fluid Structure Interaction (FSI) plays an important role in the seismic analysis and the design of Hydraulic structures. In this study, the acoustic finite element model is analyzed with impounded water considering appropriate boundary conditions between the water & the upstream ... 詳細を見る