SIMULATION SUCCESS STORIES

Modeling Helps Improve Safety in the Production of Teflon

製造業

Martin Beckmann-Kluge & Fabio Ferrero

BAM German Federal Institute for Materials Research & Testing, Berlin, Germany

BAM German Federal Institute for Materials Research & Testing in Berlin promotes industrial development by providing research and consultation on materials technology and chemical engineering. Their recent work has been in analyzing the process by which highly flammable TFE gas is converted into a solid called PTFE (polytetrafluoroethylene), or the non-stick coating commonly known as Teflon.

PlasticsEurope contacted BAM German Federal Institute for Materials Research & Testing for the creation of a mathematical model of the self-heating of TFE to determine the Maximum Ignition Temperature of Decomposition (MITD).

Using COMSOL Multiphysics, they were able to find six reactions taking place in the heated gas phase that were needed for an accurate model. Three physics interfaces in COMSOL Multiphysics were used: non-isothermal flow interface, convection and conduction interface, and convection and diffusion interface. The model now allows companies to determine if for a given reactor a specific pressure/temperature setting is not safe and then adapt their process.

Teflon is a registered trademark of E. I. du Pont de Nemours and Company.

  •  /
1
Loading PDF...

Suggested Stories

シミュレーションアプリによる添加製造における予測

シミュレーションアプリによる添加製造における予測

工業技術研究院 (ITRI) のエンジニアは, シミュレーションアプリを構築して配布することにより, 積層造形プロセスであるレーザー粉末ベッド溶融の性能を予測することができるようになりました.

The Science of Water Screening

The Science of Water Screening

Johnson Screens® are the manufacturers of steel screens that impede debris from lakes and rivers from entering pipes ...

Get a Quick Look at How Plastometrex Uses {:comsolcompiler}

Get a Quick Look at How Plastometrex Uses COMSOL Compiler™

Step into the world of the startup company Plastometrex to see how they developed an efficient method for measuring ...

MTC Develops Simulation App to Revolutionize Design for Additively ...

MTC Develops Simulation App to Revolutionize Design for Additively Manufactured Parts

Tolerances and precision in the aerospace industry are astoundingly tight. Because of the high degree of regulation ...