SIMULATION SUCCESS STORIES

Brüel & Kjær Analyzes Condenser Microphone Designs with Simulation

エレクトロニクス

Erling Olsen, Søren Andresen, Brüel & Kjær, Denmark

Brüel & Kjær, a manufacturer of transducers, microphones, and other instruments and software for sound and vibration analysis, uses numerical simulation to engineer their devices to be as accurate and precise as possible. Brüel & Kjær engineers develop condenser microphones with frequencies that range from infrasound to ultrasound, using simulation to investigate thermal stress and map resonance frequency. Simulation was used to inspect the deformation of the diaphragm of a 4134 condenser microphone, as well as to determine the influence of the air vent at low frequencies. R&D engineers at Brüel & Kjær also modeled a vibration transducer to ensure the device does not resonate at the same frequency of the vibrations that it measures.

  •  /
1
Loading PDF...

Suggested Stories

On the Cutting Edge of Hearing Aid Research

On the Cutting Edge of Hearing Aid Research

Nearly 20% of the United States population has some degree of hearing impairment. Despite the relative ...

Current Transformer Design That Combines Finite Element Analysis and ...

Current Transformer Design That Combines Finite Element Analysis and Electric Circuit Simulation

Transformers have been around for quite a while but their fundamentals are still being investigated by ABB in ...

Numerical Simulation-Based Topology Optimization Leads to Better Cooling of ...

Numerical Simulation-Based Topology Optimization Leads to Better Cooling of Electronic Components in Toyota Hybrid Vehicles

The Toyota Research Institute in Ann Arbor drives cutting-edge research in energy efficiency, mobility infrastructure, ...

Optimization Slashes Energy Consumption in Silicon-Based MEMS CO2 Detectors

Optimization Slashes Energy Consumption in Silicon-Based MEMS CO2 Detectors

CEA-MINATEC is an international center for micro and nano-technologies which is funded by CEA, a French government ...