3D Fluid flow and thermal diffusion in porous media

T. Paris¹

¹CEA VALDUC, F-21120 Is-sur-Tille, France

3D Microstructure-Resolved Modeling of Zinc-Air Batteries: Impact on Rechargeability and Performance

Mahshid Moradi¹, Julia Kowal¹

¹Technical University of Berlin, Dept. of Electrical Energy Storage Technology, Berlin, Germany

3D Simulation of an amorphous Silicon photodiode for particle therapy

K. El Achi¹, E. Cortina Gil¹, A. Warnier², V. De Beco², S. Rossomme²

¹Université Catholique de Louvain, Louvain-la-Neuve, Belgium
²IBA Dosimetry, Louvain-la-Neuve, Belgium

3D Transient Simulation of a Planar SOFC: Bridging Microstructure and Multiphysics models.

Mohamed El-Hachemi¹, Dr. Ahmed MAKRADI¹, Dr. Salim BELOUETTAR¹

¹Luxembourg Institute of Science and Technology, Esch-sur-Alzette, GD Luxembourg

3ω-method in Production Flow for Thermal Flow Sensors

Y. Tykhonenko-Polishchuk¹, B. Koster¹, V. Winnen², J. Groenesteijn², W. Sparreboom², A. Andreski¹

¹Saxion University of Applied Sciences, Enschede, the Netherlands
²Bronkhorst High-Tech BV., Enschede, the Netherlands

A 2D Computational Model of a Packed-Bed Magnetic Refrigeration System

Bruno Chinè¹, Francisco Rodríguez-Méndez², Marcela Meneses-Guzmán³, Simone Fabbrici⁴, Franca Albertini⁵

¹School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica, bchine@itcr.ac.cr
²School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica, frarodriguez@itcr.ac.cr
³School of Industrial Production Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica, mameneses@itcr.ac.cr
⁴Institute of Materials for Electronics and Magnetism, National Research Council, Parma, Italy, simone.fabbrici@cnr.it
⁵Institute of Materials for Electronics and Magnetism, National Research Council, Parma, Italy, franca.albertini@imem.cnr.it

A COMSOL Multiphysics Approach to Simulate Graphene Defect Effect on Perovskite Solar Cells

Noor ul ain ahmed¹, Monica La Mura², Vincenzo Tucci¹, Patrizia Lamberti¹

¹Department of Information and Electrical Engineering and Applied Mathematics, University of Salerno, 84084 Fisciano (SA), Italy
²Deptartment of Industrial, Electronic, and Mechanical Engineering, Roma Tre University, Rome, Italy

A modelling approach for the study of AA2024 corrosion protection using active coatings utilization

Nourhan Abdelrahman ¹, Mats Meeusen¹, Can Ozkan², Peter Visser³, J.m.c Mol², Herman Terryn¹, Mesfin Haile Mamme¹

¹Department of Materials and Chemistry, Research group Electrochemical and Surface Engineering, Vrije Universiteit Brussel
²2Department of Materials Science and Engineering, Corrosion Technology and Electrochemistry group, Delft University of Technology
³AkzoNobel

A New Homogenization Method for Radiative Heat Transfer within COMSOL Multiphysics®

F. Viry¹, J.-D. Wheeler¹, S. Semenov¹, V. Bruyère¹, P. Namy¹

¹SIMTEC, 5 rue Felix Poulat, 38000 Grenoble

A New Licensing Tool for Compiled COMSOL® Applications

D. Ericsson¹

¹Deflexional AB, Sweden

A Study of the Martensitic Transition in NiMnIn Heusler Alloy under a Magnetic Refrigeration Cycle

Francisco Rodríguez-Méndez¹, Bruno Chinè¹, Simone Fabbrici², Franca Albertini²

¹School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
²Institute of Materials for Electronics and Magnetism, National Research Council, Parma, Italy

Advanced Evaluation of Non-Precious Metal Catalysts in HT-PEMFCs Using a Three-Dimensional CFD Model

A. Samris¹, S. Mehmood¹, D. K. Bora¹, A. Faik¹

¹Laboratory of Inorganic Materials for Sustainable Energy Technologies (LIMSET), University Mohammed VI Polytechnic, Benguerir, 43150, Morocco

An Add-in Tool for Accessible Modelling and Simulation of Impellers

R. Sinatra¹, L. Barrano¹, A. Barbagallo¹, S. Cagliari¹

¹Be CAE & Test, Catania (CT), ITALY

Analyzing the interplay between strain, temperature and optical response in GeSn micro-structures

Costanza Lucia Manganelli¹, Meera¹, I. Zaitsev¹

¹IHP - Leibniz Institute for High Performance Microelectronics

Anisotropic CFD simulation of dipolar gases in the hydrodynamic regime

M. Mayle¹, R. R. Wang^2,3, J. L. Bohn⁴

¹Fakultät Angewandte Mathematik, Physik und Allgemeinwissenschaften, Technische Hochschule Nürnberg Georg Simon Ohm
²ITAMP, Center for Astrophysics
³Harvard & Smithsonian; Department of Physics, Harvard University
⁴JILA, NIST, and Department of Physics, University of Colorado, Boulder

Application of COMSOL Multiphysics for Modelling and Simulation in Battery Design and Manufacturing

Kenneth Nwanoro¹

¹UK Battery Industrialisation Centre, Coventry, UK

Assessment of Hydrodynamic Forces on a Moving Piston in a Submerged Cylinder

K. Rezk¹, W. Lin¹, J. Forsberg¹

¹Department of engineering and chemical sciences, Karlstad University, Karlstad, Sweden

Boosting the actuator efficiency of reluctance actuators with permanent magnets

M.J. Meijer¹, S. Hol², K. de Mare¹

¹DEMCON Multiphysics, Best, Netherlands
²DEMCON High-tech systems, Best, Netherlands

Chemical Reaction and Heat Transfer Simulation in a LOHC Dehydrogenation Reactor

J. Kadar¹, W. Ben-Youssef¹, M. Geißelbrecht¹

¹Helmholtz Institute Erlangen-Nürnberg (HI ERN)

Comparative Analysis on the Impact of Electrode Morphologies on Lithium-Ion Battery Performance

A. Lombardo Pontillo¹, A. Querio¹, E. Buccafusco¹, G. Boccardo¹, D. Marchisio¹

¹Politecnico di Torino, Turin, Italy

Comparison of different surrogate models for a thermoelectric energy harvester

Jan Lohbreier¹, Eugen Vambolt¹, Niklas Pöpel¹

¹Technische Hochschule Georg Simon Ohm Nürnberg

Computational Modeling of Lymph Node Flow, Cell Transport, and Tissue Mechanics

R. Kandhai¹, J. Bridge¹

¹The University of the West Indies, St Augustine Campus, Trinidad and Tobago

Comsol at Goudsmit Magnetics

M. Leskens¹

¹Goudsmit Magnetics

COMSOL/Simulink-Coupling for Optimization of Sorption Heat Storage in Residential Buildings

Ria Maria Mathew¹, Elham Abohamzeh¹, Georg Frey¹

¹Saarland University, Chair of Automation and Energy Systems, D-66123 Saarbrücken, Germany

Convected Acoustic Physics Interfaces for Acoustic Resonance Technology

Antonio Jimenez Garcia¹, Elisabetta Merico¹

¹FT Technologies Ltd

Coupled CFD–Structural Mechanics Simulation of Deformation in Non-Rigid Polypropylene Food Packaging

Sadhan Jyoti Dutta¹, Olivier Rouaud¹, Patrice Dole², Alexandre Thillier³, Sebastien Curet¹

¹Oniris, Nantes Université, CNRS, GEPEA, UMR 6144, F-44000 Nantes, France
²CTCPA, 64 Rue de la Géraudière, 44322 Nantes Cedex, France
³SAIREM - 82 Rue Elisée Reclus, 69150 Décines-Charpieu, Lyon, France

Coupled electrical and heat transfer model of hBN-encapsulated graphene

Jonathan Pearce¹, Mahjabeen Fatima Yousafzai², Ivan J. Vera Marun², Declan Tucker³, Paul Bramley⁴

¹Nation
²University of Manchester
³National Physical Laboratory
⁴Metrosol Limited

Coupling Multiscale Phenomena in Alkaline Electrolyzer Stack Simulation Using Reduced Order Models

Priit Priimägi¹, Jonathan Dallaire², Kevin Van Droogenbroek³, Joris Proost³, Kresten Juel Jensen², Rainer Küngas¹

¹Stargate Hydrogen Solutions OÜ, Tallinn, Estonia
²Resolvent Denmark P/S (Certified COMSOL Consultant), Måløv, Denmark
³Division of Materials and Process Engineering, Université catholique de Louvain, Louvain-la-Neuve, Belgium

Dependence of friction on boundary curvature for Navier-slip conditions and highly viscous liquids

A. Riefer¹, P. Damm¹, G. Meichsner¹, M. Hackert-Oschätzchen¹

¹Chair of Manufacturing Technology with Focus Machining, Otto von Guericke University Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany

Design of a Planar Transformer for Aeronautical 5 kW DC-DC Converter Using COMSOL Multiphysics

G. ORTIZ¹, L. RAMOS MONTILLA¹

¹SERMA Ingénierie, Cornebarrieu, France

Design of an Aerostatic Journal Bearing for Dicing Applications

Luigi Lentini¹, Alessandro Paolo Daga¹, Riccardo Ravaglione¹, Dario Anastasio¹, Luca Viale¹

¹Politecnico di Torino

Development and Utilization of Models for the Electrical Conditions in Submerged Arc Furnaces (SAF).

Manuel Sparta¹, Vetle Kjær Risinggård¹, Ulrik Thisted¹, Mads Fromreide¹

¹NORCE, Kristiansand, Norway

Development of a safety device for laparoscopes against visual obstruction using CFD analysis

L. Heggelmann¹, A. Schlott¹

¹Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Dresden Branch, Germany

Digital Heat Treatment Optimization for API 6A-Compliant Petrochemical Valves

J. Kadkhodapour¹, D. Perkowski ¹, K. Hornig¹

¹Andritz Metals Germany

Direct radiating phase plug for ring radiator tweeter

Dario Cinanni¹

¹ASK Industries S.p.A.

Directed cell migration continuum model as explanation for biological pattern formation

Malte Mederacke¹, Chengyou Yu¹, Roman Vetter¹, Dagmar Iber¹

¹ETH Zürich

Discharge Inception Voltage in Insulation: Verification of the Niemeyer Model Using COMSOL & MATLAB

Christoph Diendorfer¹, Robin Ramin¹, Andrii Honchar¹

¹University of Applied Sciences Upper Austria

Effect of a wireless temperature/ pressure sensor location during in-packaged food microwave heating

S. Curet¹, S. J. Dutta², O. Rouaud¹

¹Oniris, Nantes Université, CNRS, GEPEA, UMR 6144, F-44000 Nantes, France
²CTCPA, 64 Rue de la Géraudière, 44322 Nantes Cedex, France

Efficient Thermo - Hydrodynamic Lubrication Modelling of Polymer Sliders accounting for Cavitation

Giorgos Kakolyris¹, Dilek Bulut², Norbert Bader³, Ron van Ostayen¹

¹Department of Precision and Microsystems Engineering, Delft University of Technology
²Department of Precision and Microsystems Engineering, Delft University of Technology
³Faculty of Engineering Technology, University of Twente

Electro-Thermal Modeling of a Gated-Graphene Device

A. Paniz¹, A. Moschettini¹, F. Van Veen¹, M. L. Perrin¹

¹EMPA (ETH Zürich), Dübendorf, ZH, Switzerland

Electromagnetic Modeling of HTS Superconductors – A Benchmark Collection

Noël Strasser¹, Sven Friedel²

¹ETH Zurich
²COMSOL

Enhancing Cooling Efficiency of UniVessel® SU 10 L Using Submodeling and Design of Experiments

Friedrich Maier¹

¹Sartorius Stedim Biotech GmbH

Evaluating the Effects of EVA Degradation on Solar Cell Power Efficiency

L. Fromme¹, L. Osmani², A. K. Schnatmann¹

¹Institute for Technical Energy Systems (ITES), Hochschule Bielefeld – University of Applied Sciences and Arts (HSBI), Bielefeld, Germany
²Faculty of Engineering and Mathematics, Hochschule Bielefeld – University of Applied Sciences and Arts (HSBI), Bielefeld, Germany

Evolution of a geological disposal facility for radioactive waste in domal salt

Jeroen Bartol¹

¹COVRA, Nieuwdorp, Zeeland, The Netherlands

Experimentally Validated Thermochemical Modelling of Sustainable Composites in COMSOL Multiphysics®

Razie Izadi¹, David Wagner², Ahmed Makradi¹, Salim Belouettar¹, David Löpitz², Carsten Lies², Welf-Guntram Drossel²

¹Luxembourg Institute of Science and Technology (LIST), Esch-sur-Alzette, LU, Luxembourg
²Fraunhofer Institute for Machine Tools and Forming Technology (IWU), Chemnitz, SN, Germany

FEA of a Differential Eddy Current Sensor for Railway Infrastructure Condition Monitoring

Jnanashekar Prakash Reddy¹, Praneeth Chandran¹, Florian Thiery¹, Matti Rantatalo¹, Johan Odelius¹

¹Luleå University of Technology

First Comprehensive 2D Thermomechanical Modeling of SiC MOSFETs Under Extreme Short-Circuit Stress

Mustafa SHQAIR¹, Emmanuel SARRAUTE¹, Frédéric RICHARDEAU¹

¹LAPLACE, University of Toulouse, CNRS, INPT, UPS, Toulouse, France

Flow through Earth Embankments and Dams - A Comparison of Numerical Approaches

E. Holzbecher¹

¹German University of Technology in Oman, Freie Universität Berlin

Fluid flow simulation of the original Tesla valve

C. Hollenbeck¹

¹Boll & Kirch Filterbau GmbH, 50170 Kerpen, NRW, Germany

Free Surface Flow Stability Analysis

E. Favre¹, S. Mingozzi²

¹Consultant for Renaissance Fusion, 14, rue Jean-Pierre Timbaud, 38000 Fontaine, France
²Renaissance Fusion, 14, rue Jean-Pierre Timbaud, 38000 Fontaine, France

H2 production from catalytic methane pyrolysis by induction heating: energy efficiency optimization

M.Dumont¹, A.Essyed², C. Pham-Huu², J.M Nhut², A.Brazier³

¹EMDPI, Jam consulting, Grenoble, France
²ICPEES, UMR 7515 CNRS-University of Strasbourg, France
³TotalEnergies, One Tech R&D, Pau, France

Hadron Therapy Simulation App for Lung Cancer: An Educational Tool for Treatment Planning

C. de la Torre Luque¹, S. Friedel², B. B. Gulejova³

¹ETH Zürich, Zürich, Switzerland
²COMSOL Multiphysics GmbH, Zürich, Switzerland
³University of Zürich / CERN; Science for Sustainable Future, Geneva, Switzerland.

Hartmann Boundary Layer Model in a Duct Flow

E. Favre¹, S. Mingozzi²

¹Consultant for Renaissance Fusion, 14, rue Jean-Pierre Timbaud, 38000 Fontaine, France
²Renaissance Fusion, 14, rue Jean-Pierre Timbaud, 38000 Fontaine, France

Heat Enhancement in Backward Facing Step channel equipped with inclined solid and permeable baffles

Bader H. Albusairi¹, Fajer B. Shabakouh²

¹Chemical Engineering Department, Kuwait University, Kuwait
²Kuwait Integrated Petroleum Industries Company (KIPIC), Kuwait

Heat Storage Catalyst Simulation to Enhance Energy Efficiency of Integrated Chemical Reaction

Cholila Tamzysi¹, Tomokazu Nakamura¹, Justin N. W. Chiu², Takahiro Nomura¹

¹Hokkaido University
²KTH Royal Institute of Technology

How to build a Digital Twin COMSOL based App for industrial continuous monitoring

A. Barbagallo¹, R. Sinatra¹, G. Petrone¹, S. Cagliari¹

¹Be CAE & Test, Catania (CT), ITALY

Hygrothermal simulations for the signal of an integrated RH sensor for wood windows

A. Riefer¹, R. Petermann¹, M. Hackert-Oschätzchen¹, G. Meichsner¹, U. Morawietz², P. Becher², M. Gläser³

¹Chair of Manufacturing Technology with Focus Machining, Otto von Guericke University Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany
²Arnold Electronic GmbH, Gottfried-Schenker-Str. 14, 09244 Lichtenau, Germany
³IfU GmbH Privates Institut für Umweltanalysen, Gottfried-Schenker-Str. 18, 09244 Lichtenau, Germany

Impact of the Key Ageing Mechanisms in NMC Batteries and their Consequences in Degradation

R. A. Rifat¹, M. Berecibar¹, M. S. Hosen¹

¹MOBI- Vrije Universiteit Brussel, Brussels, Belgium

In Vitro–In Vivo Correlation and CFD Modeling of Solution Permeation in a PermeaPad® 96-well plates

Zahra Ghaemmaghamian¹

¹Department of Physics, Chemistry & Pharmacy, University of Southern Denmark, Odense, Denmark

Influence of gas feeder design on arc stability in a DC torch for plasma gasification

The-Anh Nguyen¹, Christian Kim Christiansen¹, Sebastian Horch¹

¹Technical University of Denmark

Influence of Marangoni Effects in Gas Tungsten Arc Welding

V. BRUYERE¹, P. NAMY¹, A. BROSSE², M. LALLIER³

¹SIMTEC, 5 rue Felix Poulat, GRENOBLE, France
²FRAMATOME, 2 Rue Professeur Jean Bernard, LYON, FRANCE
³FRAMATOME, 27 rue de l’industrie, JEUMONT, FRANCE

Influence of Temperature on the Short- and Long-Term Behaviour of Callovo-Oxfordian Claystone

M. Souley¹, C. De Lesquen², MN. Vu², G. Armand²

¹Natural Hazards, Structures and Storage Unit, Ineris, Nancy School of Mines, France
²Geomechanics, Geotechnics, and Underground Civil Engineering Department, Andra, Châtenay-Malabry, France

Innovative Product Design in EV Charging Connectors: Leveraging Topology and Shape Optimization

Roman Obrist¹, Andreas Hediger¹

¹Huber+Suhner, Pfäffikon ZH, Switzerland

Investigating eigenfrequencies and dynamic behavior of rheological measuring systems

Eugenio D'Uffizi¹, Siegfried Huck², Jan Krejci¹

¹Anton Paar GmbH
²Anton Paar Germany GmbH

Lifetime Prediction of PEM Fuel Cells in Maritime Applications

Binaya Baidar¹, Anna M. Andersson¹

¹ABB, Corporate Research

Magnetic Field Simulation via Weak Form PDE for Multi-Beam Mask Writer Applications

Y. Xiang¹

¹IMS Nanofabrication GmbH, Vienna, Austria.

Membrane modeling in carbon capture technology

Kriti Gupta¹, Paul-Christiaan Spruijtenburg¹, Bryan Verveld¹

¹Demcon Multiphysics B.V.

Microstructure Control of Hot Rolling Processing of Steels through Thermo-Mechanical FEM

Reda ARCHA¹, Sanae BAKI SENHAJI², Johan Jacquemin³

¹Mohammed VI Polytechnic University, Materials Science, Energy, and Nano-engineering MSN Department, Ben Guerir, Morocco
²Maghreb Steel, Casablanca, Morocco
³Mohammed VI Polytechnic University, Accelerated Research Center for Metallurgy, Ben Guerir, Morocco

Microwave plasma simulations for PECVD

S.W. Zeinstra¹, F.J.J. Peeters²

¹Demcon Multiphysics, Enschede, The Netherlands
²LeydenJar Technologies, Eindhoven, The Netherlands

Modeling VCSEL-to-SSMF Butt-Coupling for Enhanced Efficiency Using COMSOL Multiphysics®

M. Nasr Esfahani¹, J. Nanni¹, G. Tartarini¹

¹DEI “Guglielmo Marconi” University of Bologna Bologna, Italy

Modeling and Analysis of Droplet Behavior in Mist-CVD for Ga₂O₃ Thin Film Deposition

Ondřej Černohorský¹

¹Institute of Photonics and Electronics of the Czech Academy of Sciences, Prague, Czech Republic

Modeling and Optimization of 3D Electroformed Ni Electrodes for Alkaline Electrolysis in COMSOL

Abimbola Ashaju¹, Ahmad Harbiye¹, Nicolas Hildenbrand¹, Paul Luning¹

¹Veco B.V.

Modeling Ground Deformation at Campi Flegrei Caldera Using COMSOL Multiphysics

Pierdomenico Romano¹, Bellina Di Lieto¹, Annarita Mangiacapra¹, Zaccaria Petrillo¹

¹INGV - Osservatorio Vesuviano, Naples, Italy

Modeling of the molten metal hydrodynamics in vacuum arc cathode spots using the level-set method

Anamaria Spataru¹, Helena T. C. Kaufmann²

¹Siemens Energy S.R.L., Bucharest, Romania
²Siemens Energy Global GmbH & Co. KG Berlin, Germany

Modeling Optical Power Loss in Permalloy Film: Thermoelectric Gradient Simulations in Nanostructures

Zakyan Dunn, Tyon Phillips, Terence Baker, Md Afza¹

¹Elizabeth City State University, 1704 Weeksville Rd, Elizabeth City, NC 27909, USA

Modelling anisotropic tissues with Weak Forms

Joseph Ackermann¹

¹Collège de France

Modelling of a sintering furnace using COMSOL Multiphysics®

J. Pérard¹, G. Raveu², F. Viry¹, P. Namy¹, J. Bischoff²

¹SIMTEC, 5 rue Felix Poulat, 38000 Grenoble
²Framatome, 54 avenue de la Déportation, 26140 Romans-sur-Isère Cedex

Modelling of meta-optics based on electron beam lithography and RIE patterning process

Dr. Michael Thomschke¹

¹Jenoptik Optical Systems GmbH, Dresden, Germany

Modelling of the quantum response of a diamond-based NV probe chip for biomedical applications

Josef Soucek¹, Michael Petrov¹, Alevtina Schmakova¹

¹University of Hasselt, Martelarenlaan 42, 3500 Hasselt, Belgium

Modelling superconductor AC losses in the STEP TF magnet during plasma initiation.

Paul C Spruijtenburg¹, J. Yang², R. Wesselink¹, M. Kalter¹, A. Petrov², S.C. Wimbush³

¹Demcon Multiphysics, Institutenweg 25, 7521 PH Enschede, The Netherlands
²United Kingdom Atomic Energy Authority, Culham Campus, Abingdon, Oxfordshire OX14 3DB, United Kingdom
³UK Industrial Fusion Solutions, Culham Campus, Abingdon, Oxfordshire OX14 3DB, United Kingdom

Modelling the dry conversion process with COMSOL Multiphysics®

F. Viry¹, C. Nicollet², A. Marie², P. Namy¹, J. Bischoff²

¹SIMTEC, 5 rue Felix Poulat, 38000 Grenoble
²Framatome, 54 avenue de la Déportation, 26140 Romans-sur-Isère Cedex

Modelling Thermal Runaway Propagation in a Lithium-ion Battery Module Using COMSOL Multiphysics

Binaya Baidar¹, Anna M. Andersson¹

¹ABB, Corporate Research

Modular Approach for Balise Crossing Simulations Based on Reaction Theorem

Sebastian Südekum¹

¹Siemens Mobility GmbH, Brunswick, Germany

Modular Microjet Engine Technology

Bradley Nolan¹, Oliver Mcneill¹

¹The University of Manchester - Student, United Kingdom

Multiphysics model of atmospheric corrosion and fertilizer effect on Green Wall supporting structure

Maria Freda¹, Maryam HOSSEINZADEH ARBANI¹, Arianna Bolis¹, Rita Maria Cristina Musacchio², Luciana Intiso¹

¹RINA Consulting – CSM S.p.a.
²J&G Engineering & Architecture Ltd

Multiphysics Modeling of a Multi-Layer Thin Heater for Electric Vehicle Battery Packs

M. Lazzarin¹, M. Zerbetto¹

¹Inova Lab s.r.l. Padova, Italy

Multiphysics modeling of electrohydrodynamic drying – A staggered modeling approach

Zulhaj Rizki¹, Maarten Schutyser¹

¹Wageningen University

Multiphysics modelling and measurement correlation of a handheld induction heating device

Karthik Guruchandran¹

¹Electron One Consulting Ltd, UK

Multiphysics Simulation and Analysis of Ion-Induced Charging for Microplastic Separation

Oksana Tovmachenko¹, Marc-Peter Schmidt¹

¹Dresden University of Applied Sciences

Novel Distributed High Performance Computing Solution

Philipp Hickisch¹, Dennis Hohlfeld¹

¹University of Rostock

Numerical Analysis of an Integrated LLC Transformer with Multi Air Gaps and Litz Wire Windings

L. Fromme¹, J. Morick², R. Kunde³, M. Tolstykh⁴

¹Institute for Technical Energy Systems (ITES), Hochschule Bielefeld – University of Applied Sciences and Arts (HSBI), Bielefeld, Germany
²Faculty of Engineering and Mathematics, Hochschule Bielefeld – University of Applied Sciences and Arts (HSBI), Bielefeld, Germany
³Magnetics Design, PHOENIX CONTACT Power Supplies GmbH, Paderborn, Germany
⁴Bielefeld Institute for Applied Materials Research (BIfAM), Hochschule Bielefeld – University of Applied Sciences and Arts (HSBI), Bielefeld, Germany

Numerical investigation of Bi-directional Pulsing in Dual Magnetron Sputtering

Numerical modelling of slot die coating

Optical simulation of nanophotonic-enhanced broadband black silicon absorber

Alexey Popov¹, Duc Le¹, Antti Haarahiltunen², Toni P. Pasanen²

¹VTT Technical Research Centre of Finland, Oulu, Finland
²ElFys Inc., Espoo, Finland

Optimised hybrid magnetic shielding system using the streamfunction method for CubeSat applications

Optimised passive magnetic shielding system for CubeSat applications

T. Smith¹, A. Davis¹, J. Eccleston Etxeberria¹, I. Maskery¹, N. Holmes¹, T. M. Fromhold¹

¹University of Nottingham

Optimization of a surface plasmon resonance sensor for continuous stress monitoring

Anni Ranta-Lassila¹, Duc Le¹, Alexey Popov¹

¹VTT Technical Research Centre of Finland

Optimizing Geothermal Probe Fields and Groundwater Doublets

Karl Walter Axel SUNDERMANN¹

¹Construire Sasu, Dourdan, Ile de France, France

Optimizing miniature phase change cells for in-process self-validating thermocouples

J. Pearce¹, D. Tucker¹, P. Williams², P. Cowley², T. Ford²

¹National Physical Laboratory
²CCPI Europe

Pasta drying modeling for product quality and process optimization

E. Manoli¹, F. Petrosino², G. Coppola²

¹Barilla G. e R. Fratelli S.p.A., Parma, Italy
²DIMES, Università della Calabria, Cosenza, Italy

Predicting the critical current in the lead cable of a superconducting coil.

Koen de Mare¹, Max Rang², Rien Wesselink²

¹Demcon Multiphysics, Best, the Netherlands
²Demcon Multiphysics, Enschede, the Netherlands

Predicting the durability of bitumen and asphalt-based pavements using multiphysics modeling

Christian Feist¹, Iliass Tahiri², Fan Zhang², Ségolène Laage², Laurence Lapalu²

¹CENUMERICS, Haspingerstraße 16, 6020 Innsbruck, Austria
²TotalEnergies OneTech, Centre de Recherche de Solaize, Chemin du Canal, 69360 Solaize, France

Prediction of electro-elastic properties using COMSOL Multiphysics for energy harvesting domain

B. Kabir¹, D. Kaushik¹

¹Department of Metallurgy and Materials Engineering, Indian Institute of Engineering Science and Technology

Prediction of nonlinear harmonics in a balanced armature micro-speaker output

O. Antoniuk¹, A. Tziotziou¹, B. Haayen¹, M. Colloca¹

¹Receiver and RIC Development Department, Modeling & Simulation Team, Sonion Nederland, B.V.

Predictive Modeling of MEMS-Hotplates - From Inverse Modeling to Experimental Validation

Toni Schildhauer¹, Andreas T. Winzer¹

¹CiS Forschungsinstitut für Mikrosensorik GmbH, Erfurt, Germany

Reconfigurable Optofluidic Barriers for 3D Particle Control via Thermally Induced Flows

E. Ruiz-Reina¹, F. Schmidt², C. D. González-Gómez³, M. Sulliger², R. A. Rica-Alarcón⁴, J. Ortega-Arroyo², R. Quidant²

¹Multiphysics Modeling School, Department of Applied Physics II, University of Málaga
²Department of Mechanical and Process Engineering, ETH Zurich
³Department of Applied Physics, University of Granada
⁴Research Unit ‘Modeling Nature’ (MNat), Department of Applied Physics, University of Granada

Retention force and its frictional contribution influence on the plug-socket connection stability

A. Tziotziou¹, O. Antoniuk¹, B. Haayen², M. Colloca²

¹Sonion Nederland, B.V., Hoofddorp, the Netherlands
²Sonion Nederland, B.V., Hoofddorp, the Netherland

Robust Implementation of Neumann Boundary Conditions in COMSOL-VIPER for Realistic Bentonite Hydration at Limited Water Supply

Michael Kröhn¹

¹GRS gGmbH, Braunschweig, Germany

Selective Stray Light Suppression in Photodiode Modules via Structured Black Photoresist

T. Fink¹, D. Mitrenga¹, M. Jahn¹, A. Winzer¹

¹CiS Forschungsinstitut für Mikrosensorik GmbH

SHape Morphing of drying foods by Symmetry Breaking Principles

Ruud van der Sman¹, Luciano Teresi², Michele Curatolo²

¹Wageningen University & Research
²Roma Tre Univ.

Simplified Combustion Modeling via Reduced-Physics Approximation in COMSOL Multiphysics®

R. Eisenschmid¹

¹Syntegon Technology GmbH

Simplified thermo-mechanical modelling for the wire laser additive manufacturing process

L.Silva¹, S.Cadiou², D.Carron³, B.Levieil⁴, C.Doudard⁴

¹Institut de Recherche Dupuy de Lôme, Lorient/Brest, France
²Institut de Recherche Dupuy de Lôme
³Institut de Recherche Dupuy de Lôme, Lorient, France
⁴Institut de Recherche Dupuy de Lôme, Brest, France

Simulation and Experimental Validation of Mixing Performance in a Batch Mixer

Siqin Tao¹, Hasan Aljeratli ¹, Matthias Sunder¹, Lena Kögel², Laura Lenters², Heyko Jürgen Schultz²

¹Henkel AG & Co. KGaA, Düsseldorf
²University of Applied Sciences Niederrhein

Simulation and validation of transfer molding process of large-scale power semiconductor module

C. Kocher¹, N. Hofmann¹, D. Guillon²

¹University of Applied Sciences Northwestern Switzerland, School of Engineering and Environment, Institute of Thermal and Fluid Engineering, Windisch, Switzerland
²Hitachi Energy, Lenzburg, Switzerland

Simulation Apps at LEONI: Use Cases, Challenges and Solutions within a global company

Michael Dauer¹, Maximilian Weber¹

¹LEONI Wiring Systems, Kitzingen, Bavaria, Germany

Simulation of Gas Flow and Multicomponent Diffusion in a Single Wafer Silicon Epitaxy Reactor

A. Zienert¹, O. Fiedler², D. K. Simon², J. Schuster¹

¹Fraunhofer ENAS, Chemnitz, Germany
²Infineon, Dresden, Germany

Simulation of heat and mass transfer in thermochemical hydrogen compressors

M. Rohne¹, M. Balcerzak¹, P. Hannappel¹, F. Heubner¹

¹Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Dresden, Germany

Simulation of Multilayer Extrusion-based 3D Printing Using Level Set and Moving Mesh Methods

Carlos J.G. Rojas¹, Leyla Özkan¹

¹Control Systems Group - Department of Electrical Engineering - Eindhoven University of Technology

Simulation of Radon diffusion from soil into buildings considering media lead-through

A. Riefer¹, P. Damm¹, G. Meichsner¹, T. Muschalek², M. Gläser³, R. Schmidt³, M. Hackert-Oschätzchen¹

¹Chair of Manufacturing Technology with Focus Machining, Otto von Guericke University Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany
²Rublic + Canzler GmbH, Rohrleitungs- und Anlagenbau, Gabelsbergerstr. 4, 01809 Heidenau, Germany
³IfU GmbH Privates Institut für Umweltanalysen, Gottfried-Schenker-Str. 18, 09244 Lichtenau, Germany

Simulation Optimization of Acoustophoresis in Microfluidics: Modelling and Performance Parameters

R.Zhang¹, I.Z. Boboescu¹, V. Saggiomo², M.H.M. Eppink¹, R.H. Wijffels¹

¹Bioprocess Engineering, AlgaePARC, Wageningen University & Research, Wageningen, the Netherlands
²Laboratory of BioNanoTechnology, Wageningen University & Research, Wageningen, the Netherlands

Simulation study of the gas-liquid system in the GDEx process for PGMs recovery

I. Leon¹, S. Thayumanasundaram¹

¹VITO, Mol, Belgium

Simulation-based design of world’s largest cavern thermal energy storage: Optimization of VARANTO

Abdulrahman Dahash¹, Kimmo Korhonen², Sami Vallin², Martin Cizmar¹, Kati Ahlqvist², Markku Hagström²

¹Sustainable Thermal Energy Systems, Center for Energy, AIT Austrian Institute of Technology GmbH, Vienna, Austria
²Geological Survey of Finland GTK, Finland

Solder Degradation-based GaN Power Module Power Cycling Lifetime Prediction

Z. Sun¹, A.B. Jørgensen¹, N.H. Kristensen¹, H. Hansen¹, H. Zhao¹

¹Aalborg University, Aalborg East, Aalborg, Denmark

Study of a WCLL breeding blanket concept for a compact nuclear fusion reactor

Raphaël DAVID-MENENDEZ¹, Krishshanth PIRAPAKARAN¹

¹French Alternative Energies and Atomic Energy Commission (CEA)

Study on Modulation Transfer Function Stability in Optical Windows with Metal Grids

Sanghyuk An¹, Wooki Jung¹, Youngho Kim¹, Kisu Lee¹

¹Agency for Defense Development, Daegeon, Republic of Korea

Superconducting DC magnetic shielding for quantum computing

P. Dreverman¹

¹DEMCON Multiphysics

Surface Roughness Effect on Eddy Current Probe Response

Henry Kristianto¹, Kalle Kinnunen¹, Raine Viitala¹

¹Aalto University

Surrogate Model in COMSOL Multiphysics for Reactive Transport Modelling of Calcite-Dolomite System

G.Poškas¹, A. Narkūnienė¹, A. Šimonis¹

¹Lithuanian Energy Institute

Surrogate Modelling Based Optimization in Horology

Roland Rozsnyo¹, Gaetan Simonnot¹

¹hepia, HES-SO Geneva, University of Applied Sciences and Arts Western Switzerland

Synchrotron X-ray and FE Modeling of Flax Yarns for Technical Textile Applications

S. Guessasma¹, S. Mokli¹, J. Vijayakumar², E. Boller², E. Marklund³, M. Rouhi³

¹INRAE, Nantes, France
²ESRF, Grenoble, France
³RISE, Mölndal, Sweden

Thermal Cycle Simulation and Current Requirement Estimation for Power Cable PQ Testing

Dimitrios Gkitsos¹, Konstantina Bitsi¹, Pavlos Zairis¹

¹Hellenic Cables, Athens, Greece

Thermo-mechanical-optical study of diode pumped high Energy Laser Amplifiers for Laser Fusion

Gavin Friedman¹, Geoffroy Le Touzé¹, Bruno LeGarrec¹

¹Focused Energy, Darmstadt, Germany

Thermomechanical Behavior of High Temperature Superconductors in Test Configurations

G. Fornasier¹, A. Olchini¹

¹Ricerca sul Sistema Energetico - RSE S.p.A., Milano, Italia

Toward High Thermal-Hydraulic Performance of Heat Exchangers for Water-Gravel Thermal Energy Storage

Abdulrahman Dahash¹, Ahmed Serageldin¹, Emre Bas², Rainer Strobel²

¹Sustainable Thermal Energy Systems, Center for Energy, AIT Austrian Institute of Technology GmbH, Vienna, Austria
²Planungsgruppe M+M AG, Böblingen, Germany

Towards a Predictive Framework for Filter Clogging in Hypolimnetic Withdrawal and Treatment Systems

Towards a versatile, fully-integrated corrosion model using a combined FEM-experimental approach

M. Meeusen¹, N. Abdelrahman¹, M. Mestre¹, T. Hailay Gebregeorgis¹, R. Böttcher², M. Haile Mamme¹

¹Vrije Universiteit Brussel
²Airbus Central Research and Technology

Towards Magnetic Induction Tomography of low conductivity: A COMSOL Multiphysics simulation

Julen Eccleston Etxeberria¹, Thomas Smith¹, Alister Davis¹, Christopher Morley¹, Adam Taylor¹, Mark Fromhold¹, Niall Holmes¹

¹University of Nottingham

Tunable large surface dielectrophoretic tweezer array: simulations and experimental validation

Nicolas Ruyssen¹, Bastien Oliva², Lylian Challier², Vincent Noël², Benjamin Rotenberg³

¹Delft University of Technology, Faculty of Civil Engineering and Geosciences, Environmental Fluid Mechanics, Box 5048, 2600 GA, Delft, The Netherlands. AND Sorbonne Université, Physico-Chimie des Electrolytes et Nanosystèmes Interfaciaux, PHENIX, CNRS UMR
²Université Paris Cité, Laboratoire ITODYS, CNRS UMR, Paris 7086, France
³Sorbonne Université, Physico-Chimie des Electrolytes et Nanosystèmes Interfaciaux, PHENIX, CNRS UMR 8234, Paris F-75005, France

Ultrafast Photoacoustic Characterization of Buried Nanostructures Using COMSOL Multiphysics

Komal Chaudhary¹, Maksym Illienko¹, Matthijs Velsink¹, Stefan Witte²

¹ARCNL, Science Park, Amsterdam, The Netherlands
²TU Delft, Delft, The Netherlands

Validated Numerical Model and Simulation-Based Design Optimization of a Photoacoustic Cell

Áron Csókási¹, Panna Végh¹, István Magashegyi¹, Zoltán Bozóki¹

¹University of Szeged, Szeged, Hungary

Wire bonding simulation: harmonic perturbation for improving accuracy

Lucrezia Guarino¹, Beatrice Carasi¹, luca cecchetto¹

¹STMicroelectronics srl, via C. Olivetti, 2, 20864 Agrate Brianza (MB), Italy