Eyal Spier | April 10, 2014

The last two blog posts in the Chemical Kinetics series were concerned with modeling chemical reactions based on a particular set of parameters. While this is important and of great academic and industrial interest, the relevant parameters were assumed. Now, let’s find out how to estimate the chemical parameters using COMSOL Multiphysics.

Read more ⇢
Walter Frei | April 9, 2014

In a previous posting, we looked at computing and controlling the volume of a cavity filled with an incompressible fluid, which solved for the static deformation of a fluid-filled rubber seal. In that example, we did not explicitly model the fluid, but added an equation to solve for the pressure, assuming incompressibility of the fluid. Here, we will extend this approach and include the hydrostatic pressure of the fluid in the deforming container.

Read more ⇢

Article Categories

Fanny Littmarck | April 8, 2014

The Mach-Zehnder modulator is a type of optical modulator used for communication applications. To understand how it works and how to optimize its design, you can use the COMSOL simulation software.

Read more ⇢

Article Categories

Nancy Bannach | April 7, 2014

Fluid flow is involved in many engineering applications. In addition to typical CFD simulations, which replace experiments in wind tunnels, flow must also be considered in the cooling of electronic devices or in the chemical industry, where reacting species are transported by a fluid. COMSOL Multiphysics offers dedicated interfaces for various flow types. When should we use the Laminar Flow or Turbulent Flow interface?

Read more ⇢

Article Categories

Supratik Datta | April 4, 2014

Previously, you saw how to compute stiffness of linear elastic structures in 0D and 1D. Today, we will expand on that and show you how to model this in 2D and 3D. We will also show you an alternate method to compute stiffness.

Read more ⇢

Article Categories

Supratik Datta | April 3, 2014

Today, we will introduce the concept of structural stiffness and find out how we can compute the stiffness of a linear elastic structure subjected only to mechanical loading. In particular, we will explore how it can be computed and interpreted in different modeling space dimensions (0D and 1D) and what factors affect the stiffness of a structure.

Read more ⇢

Article Categories

Vicente Javier Jiménez Miras | April 2, 2014

From an installation point of view, the main difference between a COMSOL CPU-Locked Single User (CPU) and Floating Network License (FNL) is how they are installed and managed. However, the FNL not only offers every single benefit of a CPU license, but also enables several additional features while greatly enhancing your workflow, allowing COMSOL Multiphysics to scale with your company’s growth.

Read more ⇢

Article Categories

Amelia Halliday | April 1, 2014

The Leaning Tower of Pisa is regarded as one of the most famous landmarks in the world, although geotechnical engineers probably view it more as a construction gaffe. To prevent such a leaning fate, it could be useful to run an analysis in order to predict possible subsidence due to poroelastic deformation.

Read more ⇢

Article Categories

Lars Gregersen | March 31, 2014

Modeling in COMSOL Multiphysics involves a lot of tasks, such as choosing the right physics, defining the geometry, and setting up boundary conditions and domain settings. Additionally, material properties have to be defined for the materials included in the model. Such material data may come from the Material Library, but it often has to be obtained experimentally or from literature and imported into COMSOL Multiphysics.

Read more ⇢

Article Categories

Phillip Oberdorfer | March 28, 2014

In this first entry of our new Geothermal Energy series, we introduce the concept of modeling geothermal processes and the many physical phenomena involved. We also show you an example model of a borehole heat exchanger.

Read more ⇢

Article Categories

Thorsten Koch | March 27, 2014

To keep up with today’s fast-paced development cycles, R&D engineers and scientists need efficient tools to provide answers quickly and free them from routine tasks. COMSOL Multiphysics® has built-in features like parametric sweeps to increase simulation productivity. In addition to graphical modeling, COMSOL offers an Application Programming Interface (API) that you can use to automate any repetitive modeling step. Here’s how to get started with the COMSOL API for use with Java®.

Read more ⇢

Article Categories

1 6 7 8 9 10 63