Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Coupling between Aoustics Module and Weak Form PDE
Posted 2010/12/15 14:14 GMT-5 Acoustics & Vibrations, Modeling Tools & Definitions, Studies & Solvers Version 4.1 0 Replies
Please login with a confirmed email address before reporting spam
I would like to study the sound transmission and reflection of materials, with two domains in COMSOL. One use the physics in Acoustics Modules, while another set with Weak Form PDE. Two domains are connected by a common surface. I am wondering how can I set the boundary condition of this common surface with a weak form solution in COMSOL.
Many thanks in advance for your help.
Hello Siu-Kit Lau
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.