COMSOL Multiphysics®
  • 電磁気
  • 構造と音響
  • 流体と熱
  • 化学
  • 多目的
  • インターフェース

特集ビデオ


再生時間: 16:57

Keynote: Topology Optimization for an Efficient Design of an Electric Motor

In a keynote talk at COMSOL Day: Vehicle Electrification, Steffen Rothe of Volkswagen Group Components shares how they use multiphysics simulation and optimization to design an electric motor with ...

再生時間: 14:48

Keynote: State-of-the-Art Loudspeaker Simulation Including Shape and Topology Optimization

In a keynote talk at COMSOL Day: Acoustics, René Christensen of Acculution discusses loudspeaker simulation and shares examples from his own work. He begins with an overview of how simulation is ...

再生時間: 13:55

Keynote: Acoustic Simulation of Exhaust After-Treatment Systems

In a keynote talk at COMSOL Day: Acoustics, Naveen Indolia of SCANIA CV AB discusses how they use simulation to analyze exhaust after-treatment system designs for heavy vehicles. In the ...

再生時間: 20:11

Keynote: Designing a MEMS Acoustic Flow Microphone

Soundskrit is revolutionizing the way sound is measured by developing a new generation of microphone technology. Unlike traditional microphones, which rely on sensing pressure to detect sound, their ...

再生時間: 15:26

Keynote: COMSOL Multiphysics® for Applied Magnetics Modeling

In a keynote talk at COMSOL Day Canada, Jordan Morelli of Queen’s University discusses using COMSOL Multiphysics® to model systems in the general field of applied magnetics. He starts by ...

再生時間: 47:17

Panel Discussion: Overcoming Design Challenges with Electromagnetics Modeling

In a panel discussion from COMSOL Day: Low-Frequency EM, panelists from four different organizations discuss how they use simulation for overcoming design challenges in various low-frequency ...

再生時間: 18:14

Keynote: Low-Voltage, Deformable Mirror System Driven by MEMS-Based Lorentz Actuator Arrays

In this keynote talk from COMSOL Day: Microsystems, Byoungyoul Park of the Nanotechnology Research Center (NRC) discusses: A massive telescope development project that will have nine times the ...

再生時間: 20:34

Keynote: RF-Induced Heating of Medical Devices in Open-Bore MRI

More than 80 million MRI scans are conducted throughout the world every year, and many of the patients undergoing the scans have implanted medical devices. To keep patients safe, it is important to ...

再生時間: 27:44

Keynote: Blood Damage Modeling of FDA Benchmark Nozzle

In this archived keynote talk from COMSOL Day: Biomedical Devices, Dr. Alireza Kermani of Veryst Engineering discusses mechanical hemolysis, blood damage models, and how to simulate an FDA benchmark ...

再生時間: 25:18

Keynote: High-Intensity Focused Ultrasound Medical Devices

In this keynote talk from COMSOL Day: Biomedical Devices, Thomas Clavet of EMC3 Consulting, a COMSOL Certified Consultant, goes over: The basics of ultrasound technology How to transmit and focus ...

再生時間: 23:38

Keynote: Product Development Life Cycle for Implantable Medical Devices

In this keynote talk from COMSOL Day: Biomedical Devices, William Torres of Exponent discusses the history of biomedical engineering, the value of computational modeling for medical device ...

再生時間: 28:27

Keynote: Isolation of Pulmonary Veins by Electroporation

Atrial fibrillation is an arrhythmic disease that is often treated with pulmonary vein isolation (PVI). In a keynote talk from COMSOL Day: Biomedical Devices, Andres Belalcazar goes over how to ...

再生時間: 33:34

Keynote: Medical Device Development Revolution Impacting Speed to Market and Patient Safety

In a keynote talk at COMSOL Day: Biomedical Devices, Arlen Ward of System Insight Engineering discusses how computational modeling and simulation help revolutionize the way biomedical devices are ...

再生時間: 39:01

Panel Discussion: Simulation for Audio Product Development

In a panel discussion from COMSOL Day: Acoustics, a moderator and panelists from five different organizations discuss how they use simulation for developing audio products. Watch the video to get an ...

再生時間: 26:57

Keynote: Analyzing Optical Systems with Simulation at Carl Zeiss AG

In a keynote talk from COMSOL Day: Microwave & Optics, Manuel Decker of Carl Zeiss AG shares how his organization uses multiphysics simulation to optimize optical system designs. During his ...

最初
1–15 of 214

再生時間: 16:57

Keynote: Topology Optimization for an Efficient Design of an Electric Motor

In a keynote talk at COMSOL Day: Vehicle Electrification, Steffen Rothe of Volkswagen Group Components shares how they use multiphysics simulation and optimization to design an electric motor with ...

再生時間: 14:48

Keynote: State-of-the-Art Loudspeaker Simulation Including Shape and Topology Optimization

In a keynote talk at COMSOL Day: Acoustics, René Christensen of Acculution discusses loudspeaker simulation and shares examples from his own work. He begins with an overview of how simulation is ...

再生時間: 13:55

Keynote: Acoustic Simulation of Exhaust After-Treatment Systems

In a keynote talk at COMSOL Day: Acoustics, Naveen Indolia of SCANIA CV AB discusses how they use simulation to analyze exhaust after-treatment system designs for heavy vehicles. In the ...

再生時間: 20:11

Keynote: Designing a MEMS Acoustic Flow Microphone

Soundskrit is revolutionizing the way sound is measured by developing a new generation of microphone technology. Unlike traditional microphones, which rely on sensing pressure to detect sound, their ...

再生時間: 15:26

Keynote: COMSOL Multiphysics® for Applied Magnetics Modeling

In a keynote talk at COMSOL Day Canada, Jordan Morelli of Queen’s University discusses using COMSOL Multiphysics® to model systems in the general field of applied magnetics. He starts by sharing three ...

再生時間: 47:17

Panel Discussion: Overcoming Design Challenges with Electromagnetics Modeling

In a panel discussion from COMSOL Day: Low-Frequency EM, panelists from four different organizations discuss how they use simulation for overcoming design challenges in various low-frequency ...

再生時間: 18:14

Keynote: Low-Voltage, Deformable Mirror System Driven by MEMS-Based Lorentz Actuator Arrays

In this keynote talk from COMSOL Day: Microsystems, Byoungyoul Park of the Nanotechnology Research Center (NRC) discusses:

  • A massive telescope development project that will have nine times the ...

再生時間: 20:34

Keynote: RF-Induced Heating of Medical Devices in Open-Bore MRI

More than 80 million MRI scans are conducted throughout the world every year, and many of the patients undergoing the scans have implanted medical devices. To keep patients safe, it is important to ...

再生時間: 27:44

Keynote: Blood Damage Modeling of FDA Benchmark Nozzle

In this archived keynote talk from COMSOL Day: Biomedical Devices, Dr. Alireza Kermani of Veryst Engineering discusses mechanical hemolysis, blood damage models, and how to simulate an FDA benchmark ...

再生時間: 25:18

Keynote: High-Intensity Focused Ultrasound Medical Devices

In this keynote talk from COMSOL Day: Biomedical Devices, Thomas Clavet of EMC3 Consulting, a COMSOL Certified Consultant, goes over:

  • The basics of ultrasound technology
  • How to transmit and ...

再生時間: 23:38

Keynote: Product Development Life Cycle for Implantable Medical Devices

In this keynote talk from COMSOL Day: Biomedical Devices, William Torres of Exponent discusses the history of biomedical engineering, the value of computational modeling for medical device ...

再生時間: 28:27

Keynote: Isolation of Pulmonary Veins by Electroporation

Atrial fibrillation is an arrhythmic disease that is often treated with pulmonary vein isolation (PVI). In a keynote talk from COMSOL Day: Biomedical Devices, Andres Belalcazar goes over how to ...

再生時間: 33:34

Keynote: Medical Device Development Revolution Impacting Speed to Market and Patient Safety

In a keynote talk at COMSOL Day: Biomedical Devices, Arlen Ward of System Insight Engineering discusses how computational modeling and simulation help revolutionize the way biomedical devices are ...

再生時間: 39:01

Panel Discussion: Simulation for Audio Product Development

In a panel discussion from COMSOL Day: Acoustics, a moderator and panelists from five different organizations discuss how they use simulation for developing audio products. Watch the video to get an ...

再生時間: 26:57

Keynote: Analyzing Optical Systems with Simulation at Carl Zeiss AG

In a keynote talk from COMSOL Day: Microwave & Optics, Manuel Decker of Carl Zeiss AG shares how his organization uses multiphysics simulation to optimize optical system designs. During his ...

再生時間: 16:57

Keynote: Topology Optimization for an Efficient Design of an Electric Motor

In a keynote talk at COMSOL Day: Vehicle Electrification, Steffen Rothe of Volkswagen Group Components shares how they use multiphysics simulation and optimization to design an electric motor with ...

再生時間: 14:48

Keynote: State-of-the-Art Loudspeaker Simulation Including Shape and Topology Optimization

In a keynote talk at COMSOL Day: Acoustics, René Christensen of Acculution discusses loudspeaker simulation and shares examples from his own work. He begins with an overview of how simulation is ...

再生時間: 13:55

Keynote: Acoustic Simulation of Exhaust After-Treatment Systems

In a keynote talk at COMSOL Day: Acoustics, Naveen Indolia of SCANIA CV AB discusses how they use simulation to analyze exhaust after-treatment system designs for heavy vehicles. In the ...

再生時間: 20:11

Keynote: Designing a MEMS Acoustic Flow Microphone

Soundskrit is revolutionizing the way sound is measured by developing a new generation of microphone technology. Unlike traditional microphones, which rely on sensing pressure to detect sound, their ...

再生時間: 15:26

Keynote: COMSOL Multiphysics® for Applied Magnetics Modeling

In a keynote talk at COMSOL Day Canada, Jordan Morelli of Queen’s University discusses using COMSOL Multiphysics® to model systems in the general field of applied magnetics. He starts by sharing three ...

再生時間: 47:17

Panel Discussion: Overcoming Design Challenges with Electromagnetics Modeling

In a panel discussion from COMSOL Day: Low-Frequency EM, panelists from four different organizations discuss how they use simulation for overcoming design challenges in various low-frequency ...

再生時間: 18:14

Keynote: Low-Voltage, Deformable Mirror System Driven by MEMS-Based Lorentz Actuator Arrays

In this keynote talk from COMSOL Day: Microsystems, Byoungyoul Park of the Nanotechnology Research Center (NRC) discusses:

  • A massive telescope development project that will have nine times the ...

再生時間: 20:34

Keynote: RF-Induced Heating of Medical Devices in Open-Bore MRI

More than 80 million MRI scans are conducted throughout the world every year, and many of the patients undergoing the scans have implanted medical devices. To keep patients safe, it is important to ...

再生時間: 27:44

Keynote: Blood Damage Modeling of FDA Benchmark Nozzle

In this archived keynote talk from COMSOL Day: Biomedical Devices, Dr. Alireza Kermani of Veryst Engineering discusses mechanical hemolysis, blood damage models, and how to simulate an FDA benchmark ...

再生時間: 25:18

Keynote: High-Intensity Focused Ultrasound Medical Devices

In this keynote talk from COMSOL Day: Biomedical Devices, Thomas Clavet of EMC3 Consulting, a COMSOL Certified Consultant, goes over:

  • The basics of ultrasound technology
  • How to transmit and ...

再生時間: 23:38

Keynote: Product Development Life Cycle for Implantable Medical Devices

In this keynote talk from COMSOL Day: Biomedical Devices, William Torres of Exponent discusses the history of biomedical engineering, the value of computational modeling for medical device ...

再生時間: 28:27

Keynote: Isolation of Pulmonary Veins by Electroporation

Atrial fibrillation is an arrhythmic disease that is often treated with pulmonary vein isolation (PVI). In a keynote talk from COMSOL Day: Biomedical Devices, Andres Belalcazar goes over how to ...

再生時間: 33:34

Keynote: Medical Device Development Revolution Impacting Speed to Market and Patient Safety

In a keynote talk at COMSOL Day: Biomedical Devices, Arlen Ward of System Insight Engineering discusses how computational modeling and simulation help revolutionize the way biomedical devices are ...

再生時間: 39:01

Panel Discussion: Simulation for Audio Product Development

In a panel discussion from COMSOL Day: Acoustics, a moderator and panelists from five different organizations discuss how they use simulation for developing audio products. Watch the video to get an ...

再生時間: 26:57

Keynote: Analyzing Optical Systems with Simulation at Carl Zeiss AG

In a keynote talk from COMSOL Day: Microwave & Optics, Manuel Decker of Carl Zeiss AG shares how his organization uses multiphysics simulation to optimize optical system designs. During his ...

最初
1–15 of 214