Ivar KJELBERG
COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/05/10 13:34 GMT-4
Hi
simply add a geometry "box"=cube of the desired size centred on your geometrical model.
if it is for magnetism, consider also a sphere, you have less "edge/vertex effects on the field lines
--
Good luck
Ivar
Hi
simply add a geometry "box"=cube of the desired size centred on your geometrical model.
if it is for magnetism, consider also a sphere, you have less "edge/vertex effects on the field lines
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/05/11 8:38 GMT-4
Hi,
Could you please tell me again, how could i make the air fill box invisible in subdomain mode and boundary mode that has been shown in the example of AC/DC-- a. bond wire to a chip and b. power inductor where, i could see the bounday of the air filled box.
Thank you.
Hi,
Could you please tell me again, how could i make the air fill box invisible in subdomain mode and boundary mode that has been shown in the example of AC/DC-- a. bond wire to a chip and b. power inductor where, i could see the bounday of the air filled box.
Thank you.
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/05/11 8:43 GMT-4
Hi,
In any boundary or subdomain you can deactivate it by unchecking the "active in this domain" check box.
Suzan
Hi,
In any boundary or subdomain you can deactivate it by unchecking the "active in this domain" check box.
Suzan
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/05/11 8:47 GMT-4
Hi Suzan,
Thanks. if you look at those example that i mentioned, you will see all domain are in active mode but there are not visible.
Regards,
Rashed
Hi Suzan,
Thanks. if you look at those example that i mentioned, you will see all domain are in active mode but there are not visible.
Regards,
Rashed
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2012/02/21 14:02 GMT-5
See if there is a "wireframe rendering" option at the top of the Graphics Pane. That should make the box invisible but still show the boundaries.
--
Laura Barkett
The Miltec Corporation, Emerging Technologies
AMRDEC, CFD Engineer
NASA, Nuclear Propulsion
See if there is a "wireframe rendering" option at the top of the Graphics Pane. That should make the box invisible but still show the boundaries.
--
Laura Barkett
The Miltec Corporation, Emerging Technologies
AMRDEC, CFD Engineer
NASA, Nuclear Propulsion