Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Changing the temporary files path

Posted 2011/05/21 5:03 GMT-4 Installation & License Management, Studies & Solvers Version 4.1 0 Replies

Mark Jensen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Here I have 2 issues to solve :

1- My COMSOL program is installed in : D:\COMSOL41
When I run calculations, temporary files are created in my Windows intallation path which is based on a 30 Go SSD drive.
The problem is : this drive is too small to fully run these calculations.

How can I change the path of the temporary results files in order to saved them in : F:\COMSOL files ?

2- When I interrupt a simulation, I can continue it afterwards.
But it seems to me that when I do "continue" the simulation, it starts from the begining again.
(The model file does not change its size after saving a period of simulation)

Thanks for help
0 Replies Last Post 2011/05/21 5:03 GMT-4
COMSOL Moderator

Hello Mark Jensen

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content