Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Spark Plasma Sintering
Posted 2011/05/31 23:13 GMT-4 Version 3.5a 2 Replies
Please login with a confirmed email address before reporting spam
Hello,
I'm working with SPS problem. This involves thermal-electric and structural deformation. I try to make the most simple case: structural in the static version. The main to problems for me are related to the structural boundary conditions and the existence of voids (white holes) in the deformed shape. This voids regions also appears if i consider only thermal and electric problem. Sorry i'm new in the area.
thanks
EGA
I'm working with SPS problem. This involves thermal-electric and structural deformation. I try to make the most simple case: structural in the static version. The main to problems for me are related to the structural boundary conditions and the existence of voids (white holes) in the deformed shape. This voids regions also appears if i consider only thermal and electric problem. Sorry i'm new in the area.
thanks
EGA
Attachments:
2 Replies Last Post 2011/06/03 11:36 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Ernesto
How are you simulating the deformation?
How are you simulating the deformation?
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
H!, and thanks
I'm consider the problem in the quasi-static approximation. In this case, it is better to take into account a prescribed displacement or to consider the domains and boundaries Free?
best regards
EGA
I'm consider the problem in the quasi-static approximation. In this case, it is better to take into account a prescribed displacement or to consider the domains and boundaries Free?
best regards
EGA