Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Draw curves

Posted 2011/06/23 16:54 GMT-4 Low-Frequency Electromagnetics, MEMS & Nanotechnology, RF & Microwave Engineering, MEMS & Piezoelectric Devices, Battery Design, Parameters, Variables, & Functions, Results & Visualization Version 3.5a, Version 4.0 2 Replies

Bahar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I use Comsol 3.5 and I simulated the electrical field between 2 electrodes. Now I want to draw a curve (X=Distance between electrodes) (Y=the Electric field) or something like this. But I can not find any special tabs for drawing these kind of curves (x,y). can someone tell me what should I do?
2 Replies Last Post 2011/06/24 19:06 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/06/23 17:54 GMT-4
If I understand what you are trying to do correctly, you want to parametrize your geometry and then plot a quantity that varies with the parameter vs the parameter. If that is the case, then consider upgrading to the current version, v4.2, which makes parametrizing a geometry quite easy. In v3.5, it is tedious work at best.
If I understand what you are trying to do correctly, you want to parametrize your geometry and then plot a quantity that varies with the parameter vs the parameter. If that is the case, then consider upgrading to the current version, v4.2, which makes parametrizing a geometry quite easy. In v3.5, it is tedious work at best.
Bahar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/06/24 19:06 GMT-4
Yes Jean. Thant's exactly what I want to do. It seems I should think about upgrading my version. I tried many ways but as you mentioned it is tedious work.
Yes Jean. Thant's exactly what I want to do. It seems I should think about upgrading my version. I tried many ways but as you mentioned it is tedious work.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content