Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

assign properties to individual meshes?

Posted 2011/06/29 12:34 GMT-4 RF & Microwave Engineering Version 3.5a 0 Replies

Mohammad Khan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

Can I assign properties to meshes in some selected region.

For example, I am working with RF module with a 50nm * 50nm * 100nm structure. Now, I want to assign some refractive index to the region:

10nm < x < 15nm
12nm < y < 15nm
50nm < z < 55nm

I know I could just draw a box and put the desired refractive index in that subdomain... but in general, if I do not have a separate subdomain, or if I need to randomly assign properties, how can I do that?

Thanks in advance.
0 Replies Last Post 2011/06/29 12:34 GMT-4
COMSOL Moderator

Hello Mohammad Khan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content