Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
corona discharge
Posted 2011/08/30 4:41 GMT-4 Version 4.3b 2 Replies
Please login with a confirmed email address before reporting spam
Hello everybody,
I am new in comsol and I try to create a numerical model in comsol to simulate the corona discharge between a very thin tungsten wire (20 micrometer diameter) and a grounded aluminium plate. The two elements were placed in air. Which model should I use ? (PDE, EMES, Electrostatics generalized.....?)
Thank you!
I am new in comsol and I try to create a numerical model in comsol to simulate the corona discharge between a very thin tungsten wire (20 micrometer diameter) and a grounded aluminium plate. The two elements were placed in air. Which model should I use ? (PDE, EMES, Electrostatics generalized.....?)
Thank you!
2 Replies Last Post 2011/08/30 13:25 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Marius,
I presume the plasma module should fit best. However, I don't have it so I cannot give practical advice.
Cheers
Edgar
I presume the plasma module should fit best. However, I don't have it so I cannot give practical advice.
Cheers
Edgar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
If been trying to model corona discharges with comsol too. My advice is that you should start with the tutorial models on the DC plasma to get to know how it works.
To solve a corona discharge the module to be used is the plasma. However, you will face several problems if you have planned to solve an atmospheric pressure discharge.
Good luck!
JH
If been trying to model corona discharges with comsol too. My advice is that you should start with the tutorial models on the DC plasma to get to know how it works.
To solve a corona discharge the module to be used is the plasma. However, you will face several problems if you have planned to solve an atmospheric pressure discharge.
Good luck!
JH