Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

heat transfer-wire edm modelling-

Posted 2011/09/13 7:01 GMT-4 Heat Transfer & Phase Change Version 4.0a 1 Reply

Aswin Padmanabhan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

sir,
i am working on modelling of wire edm process...so that i hav 2 make a cylindrical heat source..i hav already made a cylindrical mooving heat source..But its completely volumetric source.How can i make a planar source..i need the flux only from surface of the cylinder..dnt need inner side..
thank you,
1 Reply Last Post 2011/09/28 6:01 GMT-4
Aswin Padmanabhan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/09/28 6:01 GMT-4
can anyone pl reply??
can anyone pl reply??

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content